1 / 13

Arc Welding

Welding is one of the most dangerous professions. Flying sparks toxic fumes volatile gases high electrical currents and radiant heat are just a few hazards of this craft. Then there's the danger to your eyes, such as developing cataracts.. What is Arc Welding?. Arc welding uses a welding po

garren
Download Presentation

Arc Welding

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Arc Welding

    2. Welding is one of the most dangerous professions. Flying sparks toxic fumes volatile gases high electrical currents and radiant heat are just a few hazards of this craft. Then theres the danger to your eyes, such as developing cataracts.

    3. What is Arc Welding? Arc welding uses a welding power supply to create an electric arc between either an electrode or stick and the base material to melt the metals at the welding point.

    4. Hazards ULTRAVIOLET RADIATION Welding produces the entire spectrum of Ultraviolet Radiation (UV A, B & C) If skin exposed for too long, welder can get a sunburn Can cause skin malignancy (aka skin cancer) Ocular Melanoma Arc Flash can occur through the side of the eye If you look at the light from the arc too long, the bacteria on your eyes is killed and there is no longer lubrication so it feels like your eyes are covered in sand. It hurts to close them. Doesnt go away for a while (24+ hours) usually you cant even sleep it hurts so bad. If you look at the light from the arc too long, the bacteria on your eyes is killed and there is no longer lubrication so it feels like your eyes are covered in sand. It hurts to close them. Doesnt go away for a while (24+ hours) usually you cant even sleep it hurts so bad.

    5. Hazards RADIANT HEAT Welding Guns can produce heat above 1,000 Degrees Can burn skin and eyes Welders wear PPE including gloves, long sleeves (usually made out of leather or another thick material) and a welding hood. In Florida, and other hot climates, the welding PPE itself can cause OVERHEATING.

    6. Precautions (Personal Protective Equipment)

    7. Hazards GASES During the welding process there are several fumes and gases released as the filler material and metals bond with each other. Welding should always take place in a well ventilated area to allow the toxic fumes and gases to escape. Gases, such as argon, displace oxygen, causing death. Some workers are exposed to excess Manganese fumes which can cause Manganism and Parkinsons Disease.

    8. Precautions VENTILATE the Area . Use low-fume welding rods when possible Use local-exhaust ventilation and keep exhaust hood openings 4 to 6 inches from the fume source Use air blowers to blow fumes away from you Keep your face as far away from the welding plume as possible Use a respirator when possible - especially when ventilation is inadequate

    9. Hazards ELECTRIC SHOCK Welding processes that use electricity pose both obvious and subtle hazards of electric shock which can be fatal.

    10. Precautions Wear dry, insulated gloves in good condition and protective clothing. (Change as necessary to keep dry) Insulate yourself from the workpiece and ground by wearing rubber soled shoes or stand on a dry insulated mat. Do not touch the ground with any other part of your body. Do not wrap cables carrying current around your body. Do not touch an energized electrode with bare hands. Turn off all equipment when not in use. Use only well maintained equipment and cables Avoid Wet working conditions, even perspiration can lower the bodys resistance to shock.

    11. Hazards Explosions/Fire Although it is less heard of, since there are sparks formed by the welding method explosions and fires are a risk welders work with. This is a picture of what was left after a welder apparently was welding and the heat or sparks from the welding ignited residual vapors and/or material in the barrel, causing it to explode. The explosion knocked the victim down, and started a fire in the immediate area. There was an explosion and the guy died. This is a picture of what was left after a welder apparently was welding and the heat or sparks from the welding ignited residual vapors and/or material in the barrel, causing it to explode. The explosion knocked the victim down, and started a fire in the immediate area. There was an explosion and the guy died.

    12. Precautions Do not weld on containers that have held combustible materials. Check carefully before welding. Remove flammable materials from welding area or shield from sparks - heat. Keep a fire extinguisher in the immediate area. Wear fire retardant clothing and safety cap. Use earplugs for overhead welding.

    13. How Dangerous is it Really? More than 365,000 welding related eye-injuries YEARLY. Even people who are not welders can be injured from being too close to the arc. Few Explosion Related Deaths but there are still cases. More than 10,000 people per year are seriously injured as a result of a welding accident.

    14. OSHA Says (1926.351) Use only manual electrode holders specifically designed for arc welding/cutting. Any current-carrying parts must be fully insulated. Cables/Equipment in need of repair shouldnt be used. Proper Grounding required. Unattended electrode holders shall be placed so that they dont come in contact with employees or conducting objects. Hot electrode holders shouldnt be dipped in water (risk of electric shock). Power Supply should be turned off when not in use. Whenever plausible, all operations shall be shielded by non-combustible or flameproof screens which will protect employees and other persons working in the vicinity from the direct rays of the arc.

More Related