1 / 9

Indoor Localization Demo Setup

Indoor Localization Demo Setup. DEMO. 3 個人 星期二 dry run, 早上 9AM 星期 三 記者會 科技大樓 下午 DEMO 5 分鐘 3, 去科技大樓 , Polly, sy , < vincent > 3, 在學校 demo, [ steven ], [ steve ], [ jason ], [ km ], [ 羅倫斯 ] , [ helen ], [ 布萊恩 ] 養家活口 , [ 教授 ]. System Overview. Tag. Hardware

huslu
Download Presentation

Indoor Localization Demo Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Indoor Localization Demo Setup

  2. DEMO • 3個人 • 星期二 dry run, 早上 9AM • 星期三 記者會 科技大樓 下午 DEMO 5分鐘 • 3, 去科技大樓, Polly, sy,<vincent> • 3,在學校demo, [ steven ], [ steve ], [ jason ], [ km ], [ 羅倫斯 ] , [ helen], [布萊恩] • 養家活口, [教授]

  3. System Overview Tag • Hardware • Program taroko nodes • Beacon • Sink & Relay (MD) • User tags • Software • Position system Tag Tag TestBed USB Internet Position System (Server, 140.112.42.161) Position System (client, any computers)

  4. Hardware - servers • 實驗室 (621) • IP: 140.112.42.161 • Name/Password: nslab/ns621 • Polly辦公室 (613) • IP: 140.112.42.157 • Name/Password: nslab_winpc/ns621

  5. Hardware – user tag • Need 2 tag, one with bio sensor • Can be programmed from 140.112.42.161 • cd /opt/justinh/demo/apps/Localization/tag • Type “make telosb install.ID bsl,COM-1” in cygwin • ID: id number, COM-1: com port number - 1 • Be Carefull !! • Check the ID of bio sensor and then program the tag with same ID

  6. Hardware – testbed • Login 140.112.42.161 • Open cygwin • In cygwin console • cd /opt/justinh/demo/apps/scripts • ./system-allinone-161 • Login 140.112.42.157 • Open cygwin • In cygwin console • cd /opt/tinyos-1.x/justinh/demo/apps/scripts • ./system-allinone-157

  7. Software – Server • Login 140.112.42.161 • Open Position System • All setting should be load automatically ( map, beacon, …) • Connection > Serial Port > Connect • Select COM103, baurate57600 • Connection > Internet > Server > Connect • Choose a port number • Check the data is shown at “Connection Log” page • Toggle, View > User and Bio • Press “Start”

  8. Software – Client • Any Computers • Open Position System • All setting should be load automatically ( map, beacon, …) • Connection > Internet > Client > Connect • 140.112.42.161:[PORT] • Check the data is shown at “Connection Log” page • Toggle, View > User and Bio • Press “Start”

  9. Possible Troubles • Taroko programming fail • Check the message after typing “./system-allinone-161,157” • A taroko is programming successfully if “Reset device…” is shown • Solution: Re-program, re-plug USB, re-boot computer • Serial port connection fail • Re-start Position System, re-boot computer

More Related