1 / 18

Chapter 11: Light and Moderate Work

Chapter 11: Light and Moderate Work. Dr. Katie Cahill Science 295. Light and Moderate Work. Basic metabolic functions work the same as with hard labor, but at a lower level Byproducts dissipated through the skin and respiration

inez
Download Presentation

Chapter 11: Light and Moderate Work

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 11: Light and Moderate Work Dr. Katie Cahill Science 295

  2. Light and Moderate Work • Basic metabolic functions work the same as with hard labor, but at a lower level • Byproducts dissipated through the skin and respiration • Blood flow is not a limiting factor; the demands require an ability to perform endurance tasks with attention to detail during possibly long shifts • Environment contributes to our perception of work • Psychosocial environment - getting along with co-workers and supervisors • Physics environment – temperature, humidity, noise and lighting, arrangement of working hours (shiftwork)

  3. Physiological and psychological principles • Most jobs are sedentary and require little physical effort • Many people with sit-down jobs try to bring up daily expenditures by doing demanding leisure activities to avoid weight gain from unneeded food intake

  4. Physiological and psychological principles • Stairs and ramps • Use the stairs instead of the elevator to make up for sedentary day • Energy use depends on step design and stair steepness (Figure 11.2) • Measuring work and load effects • Heart rate is the most useful indicator during light work because it responds to static muscle loading • HR may also respond to emotional excitement, emotions; HR may reflect more than just physical work • Other possible techniques: EMGs, EEGs, eyelid closure frequencies, simple observation

  5. Physiological and psychological principles • Scaled judgments • A way to assess satisfaction is to ask for employee opinions • Usually done through questionnaires: • Paired descriptors (p. 218) • Ordinal scales – pain on a scale of 1-10 • Interval scales • Ratio scales – allow for mathematical calculations • Subjective, not objective information • Studies may generate awareness of problems at work, which management may want to avoid

  6. Physiological and psychological principles • Nordic questionnaire (figure 11.3) • 2 parts: • General information • Area focused on specific regions of the body -Body is divided into 9 regions and the person indicates where they experience musculoskeletal problems

  7. Tiredness, boredom and alertness at work • Tiredness – the state in which we feel unable or disinclined to continue a task • Fatigue – the physiological effect of having spent our energy, or overstrain of our muscles so that our body needs to rest • Boredom – the psychological or emotional condition in which a lack of events lulls us into a state of sluggishness • Bottom line: In everyday life we feel tired as a result of physical fatigue or psychological boredom

  8. Tiredness, boredom and alertness at work • Diversity vs. monotony • Monotony - the quality of constancy, routine, and lack of variety • Some individuals enjoy jobs that have diverse parts -challenges mental and physical capabilities -keeps workers interested -Workers find satisfaction in successful solutions • For others, job/task predictability is appealing -find satisfaction in skillful repetition • For most people, performance and job satisfaction is best when the job is not overly simple or overly complex

  9. Tiredness, boredom and alertness at work • Vigilance and event frequency • Ability to maintain concentration was found to be very important during WWII • Noticed that the frequency with which radar watchers reported submarines decreased with the longer they watched; alertness decreased with time on watch • Frequency of signals influences number of reported signals -too few signals – observers becomes bored and pays less attention -too many signals – observer becomes overwhelmed and cannot report them all - It has to be just right! (figure 11.5)

  10. Tiredness, boredom and alertness at work • Performance decreases • with time • if the time intervals are too long • If the observer is fatigued or mentally stressed • If the environment is too hot or loud

  11. Tiredness, boredom and alertness at work • Monotonous jobs • Tayloristic approach • During the 1920s, industrial workers were responsible for small, highly repetitive tasks • Good because the worker became highly skilled • Bad because led to repetition injuries and boredom

  12. Tiredness, boredom and alertness at work • Satisfaction at work • Work preferences differ, but everyone wants to feel successful in their job • This requires communication between a manager and employees • Managerial control: higher level, focused on work design, organization and administration • Detail control: task level, workplace arrangement, tools and procedures • Having control over a task at work is empowering; lack of control/understanding can be stressful • Communication between team members can create a highly productive and stimulating social environment

  13. Suitable postures at work • No static work • Fatigue in light to moderate work occurs as a result of maintaining a constant posture over a long period of time • Muscles are under constant contraction, blood cannot flow through the tissue and metabolic wastes accumulate • Muscles fatigue and have to rest • Blood can flow through the tissue, remove the metabolic wastes and recover

  14. Suitable postures at work • Avoiding fatiguing body postures • Standing, stooping and kneeling • Examples of fatiguing conditions at work? • Sitting at work • Less tiring than standing • Different seated positions are suitable for different tasks • Too much sitting • Truck drivers and military pilots • Patients on bed rest – bedsores • Moving is essential for well-being and comfort

  15. Accurate, fast, skillful activities • Exact manipulations • Light work is performed best in a work area at about waist height • Exact manipulations may require arm rests • Microscope work is difficult because neck muscles remain static – images can now be projected onto a monitor • Seeing what we are doing • Having to twist your neck to see what you are doing at work results from poor ergonomic planning • Normal LOS is angled downward • Eye movements 15 degrees above and below the LOS are comfortable (figure 11.16) • Therefore a viewing task works best within a well lit 30 degree range

  16. Accurate, fast, skillful activities • Better Tools • Constant bending results from improper design • Flaws in design must be adjusted (figures 11.17, 11.18) • Repetitive Work • Leads to injuries of muscle, CT and joints • Affects both physical laborers and desk workers • Human body is not designed for repetitive actions (Table 11.2) • Low back, wrists, shoulders and elbows are the most common areas affected by repetition

  17. Accurate, fast, skillful activities • Rest breaks • Both physiologically and psychologically beneficial • Many short breaks are more beneficial than few longer breaks • Breaks help to avoid monotony, prevent overload, allow for social interaction and a chance to restore energy supplies with food

  18. Summary • Light and moderate tasks don’t impose heavy physical burdens but require attention to detail for long periods • HR is a useful indicator of physical strain, but can also be affected by emotions; questionnaires can also be used • Some people enjoy consistency and repetition in their jobs; others enjoy challenging, diverse tasks • Job satisfaction is greatest when the job is neither too complex nor too simple • Physical fatigue can result from static positions as well as overexerting muscles • Viewing tasks are best performed within a 30 degree cone in front of the body • Repetition increases skill level but puts the worker at risk for repetition injuries • Breaks are both physiologically and psychologically beneficial • Many short breaks are more beneficial than few longer breaks

More Related