110 likes | 262 Views
LiH Absorber for MICE. Alan Bross May 31, 2009. LiH Absorber in Cooling Channel. LiH absorbers are now the “baseline” for the initial 4D cooling Replaced LH 2 The R&D issues have to do with the material properties of LiH Thermal characteristics Thermal conductivity Stability
E N D
LiH Absorber for MICE Alan Bross May 31, 2009
LiH Absorber in Cooling Channel • LiH absorbers are now the “baseline” for the initial 4D cooling • Replaced LH2 • The R&D issues have to do with the material properties of LiH • Thermal characteristics • Thermal conductivity • Stability • Radiation Stability • Program Goal • Test Thermal properties of Hot-Isostatic Pressed LiH • Claimed to yield material with 98%+ theoretical density • Best thermal conductivity • Test in MICE Alan Bross MICE CM24 June 2009
LiH Disc Fabrication • Subcontracted for production at Y12 • Produced by Hot Isostatic Pressing • Produced using existing mold design • Mechanical properties of final parts will be measured • Density, hardness, etc • Final Parts to be chemically tested • X-Rayed by Radiography to ensure no voids • Machined to size • Dimensional inspection • Coated with vapor barrier • Process steps STILL under discussion and Need to be finalized • Packaged in drum type container • Shipped to Fermilab via Fed-X • Production will consist of • 30 and 50 cm diameter disks (+2” disks for destructive testing) Alan Bross MICE CM24 June 2009
Instrumented 30 Æ cm Disk 12 Blind holes for housing thermo-couples Alan Bross MICE CM24 June 2009
Thermal Measurement Test Setup Foam board & gasket 1” copper tube with heaters High temp glass ceramic High temp low k gasket Machined LiH disc 12” dia steel ring Thermocouples X12 Flexible cooling tube Stainless steel base structure Alan Bross MICE CM24 June 2009
MICE Step III.1 • Produce 50 cm Æ X 6.5 cm thick disk for MICE for first “cooling” measurement Solenoid Cerenkov Detector Calorimeter Time-of-flight Detector LiH Disk inside the Spool piece Alan Bross MICE CM24 June 2009
LiH Absorber for MICE Step III.1 Alan Bross MICE CM24 June 2009
Status of Negotiations with Y12 • All the technical specifications and production issues are resolved • The Order Has Been Placed! • Delivery in 8-12 weeks • Parts will have Parylene coating Alan Bross MICE CM24 June 2009
Parylene C • Provides 10X better vapor barrier than epoxy Alan Bross MICE CM24 June 2009
Carbon-Fiber Supports Fabrication to start this summer Alan Bross MICE CM24 June 2009
Summary • The LiH for Step III.1 is on order and should be delivered well in advance of when it will be needed for installation in the hall • Must begin to work with RAL safety • There should be no issues, but the sooner we start “educating”, the easier it will be • Peter Towndrow of the Atomic Weapons Establishment (AWE) in Reading is an expert in LiH materials and has offered to come to RAL to brief RAL safety • The “Nuclear Material” Aspects of the material is also an issue • Since the disk for MICE contains > 50g of 6Li, it is considered nuclear material • Special shipping arrangements may have to be made • A RAF flight between Hanford and the UK may be used. • Will work this out with the Y12 people Alan Bross MICE CM24 June 2009