1 / 5

GenSet Test Update, Lubrication Oil Analysis, Soot Analysis

GenSet Test Update, Lubrication Oil Analysis, Soot Analysis. Nick Johnson 3-4-08 NBEL Wayne State University. Engine Update . 212 Hours of 240 Run on RKA-ULSD as of this morning Able to get smoke meter results with regularity

jane-dickson
Download Presentation

GenSet Test Update, Lubrication Oil Analysis, Soot Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GenSet Test Update, Lubrication Oil Analysis,Soot Analysis Nick Johnson 3-4-08 NBEL Wayne State University

  2. Engine Update • 212 Hours of 240 Run on RKA-ULSD as of this morning • Able to get smoke meter results with regularity • Start Up and Shut Down Procedures Written for Engine, Load Bank, and Data Acquisition

  3. Plan of Work - Diesel Soot Dilution in Lubrication Oil • Analyze the effects of soot on lubrication oil viscosity • Measure vs three set standards 0%, 2% and 5% soot levels diluted in unused lubrication oil • Measure viscosity of 2 sets of data from each fuel (120 and 240 hrs) ran at 2 temperatures (40C & 90C) • Compare test results vs standards to measure soot levels and viscosity variances between each fuel • Compare results vs published results

  4. Plan of Work - Diesel Soot Dilution in Lubrication Oil Standards Matrix Samples Matrix

  5. Future Work • Develop Standards for Used Oil Analysis • 0%, 2%, 5% Soot Levels (5% seen as highest levels in literature search) • Analyze standards on Viscometer?? • Test Used Oil Samples at half and full-life of test (120 hrs and 240 hrs) • Finish Plan of Work • Perform Other Military Suggested Testing: ASTM 893-05a and 3524-04, and fuel injector coking

More Related