220 likes | 503 Views
Bridge Construction. Print out your WPBD Bridge. Write your name and period here. Supplies Needed. Glue. Wood from Teacher. Sand Paper. X acto knife . Cutting Board. Use bridge printout to measure wood length. Safety. Be very careful. X acto knives are very sharp!.
E N D
Print out your WPBD Bridge. Write your name and period here.
Supplies Needed Glue Wood from Teacher Sand Paper X acto knife Cutting Board
Safety Be very careful. X acto knives are very sharp!
Use knife to cut wood to length.Make sure to use cutting board!
Glue the edge of wood Use a small amount of glue. Try and not make a mess. If you make a mess clean it up.
Now that top and bottom are done, work on the ends the same way you did the top and bottom.
Make your wood pieces a little long and sand them to the correct size.
There should be a small gap to no gap, between the top and bottom pieces.
Put the stick into place on your paper and start on the other end.
Use the same process to cut and glue in the middle pieces of wood to finish the first side.
Clean up the glue spills during clean up time, which is the last 10 minutes of class.
Put your knife away, blade side down. Straighten your area up.
Use the hand brooms and dust pans to clean up the scraps on the table and floor.
Put your bridge in the blue cubbies and return your extra pieces of wood to the teacher.
No one is excused from class until everything is CLEANED UPand PUT AWAY