1 / 6

WLTC Mode Construction

WLTC Mode Construction. Prepared by Japan 17 th DHC Meeting Tokyo, Japan 20 th March 2013. 1. ICE / NOVC-HEV / CS test for OVC-HEV. Combined data (L ~ Ex-H). RCB factor@RCB(L~Ex-H). (only CO2). Combined data (L ~ H). Calculation process. RCB factor@RCB(L~H). (only CO2).

mateja
Download Presentation

WLTC Mode Construction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WLTCMode Construction Prepared by Japan 17th DHC Meeting Tokyo, Japan 20th March 2013

  2. 1. ICE / NOVC-HEV / CS test for OVC-HEV Combined data (L ~ Ex-H) RCB factor@RCB(L~Ex-H) (only CO2) Combined data (L ~ H) Calculation process RCB factor@RCB(L~H) (only CO2) Ki (L ~ H for PM, H for others or Ex-H for all) Ki (L ~ H) All except PM Sample (L ~ H) Sample (PM) LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH* 323s Required measurement items per each test RCB(L) Sample(L) RCB(M) Sample(M) RCB(H) Sample(H) RCB(Ex-H) Sample(Ex-H) RCB Sample (all except PM) Ki (L) Ki (M) Ki (H) Ki (H or Ex-H) (only CO2) (only CO2) (only CO2) (only CO2) RCB factor@RCB(M) RCB factor@RCB(L) RCB factor@RCB(H) RCB factor@RCB(Ex-H) Calculation process L phase data M phase data H phase data Ex-H phase data Each phase information (note : no PM data is available) Note ) Ex-HIGH phase is exempted as per CPs need Fuel consumption is derived after carbon related pollutants were compensated.

  3. 2. CD test for OVC-HEV and BEV unit unit unit unit Calculate each phase values during CD (pollutants, CO2, FC, EAER, Rcda and so on

  4. 3. Ki Determination • Test without regeneration • each of L ~ H - Loading cycle Test with regeneration Start of regeneration LOW 589s MIDDLE 433s HIGH 455s LOW 589s MIDDLE 433s HIGH 455s LOW 589s MIDDLE 433s HIGH 455s 1 2 ・ ・ ・ n Sample#1 Sample#2 Sample#3 LOW 589s MIDDLE 433s HIGH 455s PM sampling Under regeneration ・ ・ ・ End of regeneration Enormal･LOW(g/km) DLoad (km) (including test distance) LOW 589s MIDDLE 433s HIGH 455s Sample#1 Sample#2 Sample#3 <Example of additive Ki factor for Low phase> PM sampling ( Enormal･LOW * DLoad + Eregen･LOW * Dregen ) Ki = Eregen･LOW(g/km) = ∑ Mregen･LOW (k) / DLOW *n Dregen (km) - Enormal･LOW*(DLoad+ Dregen) n k=1 Ex-H phase Ki : allow to use H (L~H for PM) phase Ki As an option, allow to conduct Ex-H Ki determination

  5. 4. RCB Compensation Factor for CO2 RCB factor for each phase and whole test phases preconditioning LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH 323s Set SOC at several level Overnight soak sampling LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH 323s Sample CO2 and RCB CO2 Obtain RCB compensation factor for whole phases RCB (Ah/km)

  6. 4-1. RCB Compensation Factor (Validation2) Horizontal unit Ah  Ah/km

More Related