1 / 15

SUMARE PAYLOAD

SUMARE PAYLOAD. CONTENTS Objectives. Sensors choice. Sensors performances. Implant possibilities. Sensors conditioning. Schedule. Sensors integration drawings. Fins navigation trials. Fresh water tank measurement sensors. 2. OBJECTIVES

mervin
Download Presentation

SUMARE PAYLOAD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SUMARE PAYLOAD

  2. CONTENTS • Objectives. • Sensors choice. • Sensors performances. • Implant possibilities. • Sensors conditioning. • Schedule. • Sensors integration drawings. • Fins navigation trials. • Fresh water tank measurement sensors. 2

  3. OBJECTIVES The “Payload” will assume two main operational functions. • Monitoring of the volumetric evolution of sand banks. • Obstacles avoidance. 3

  4. SENSORS CHOICE Altimeter. Acoustic high frequency transducer ( Resolution) Obstacles avoidance. The inner Mauve transducer is not available (Software limits / Discrimination). The transducer is the same than for altimeter. 4

  5. SENSORS PERFORMANCES Measurement limit : 50 m Measurement mode : Free run Measurement speed : 10 Hz Power supply : 12 or 24 VDC Interface : RS 232 or RS 485 Frequency : 500 kHz Conical beam : 6° 5

  6. IMPLANT POSSIBILITIES 1 : Risk on Payload structure (depth) Obstacle avoidance sensor not possible. 2 : Risk on launching. 3 : chosen solution 6

  7. SENSORS CONDITIONING Conditioning electronic : two output Two output are available on MMNS 1 RS 232 1 RS 485 The two electronic signal conditioning units will be connected on these outputs 7

  8. SCHEDULE 8

  9. SENSORS INTEGRATION. 4 configurations will be tested at sea. • 1 :Fins 60 mm long in front of the payload. • 2 :Fins 60 mm long in back of the payload. • 3 :Fins 120 mm long in front of the payload. • 4 :Fins 120 mm long in back of the payload. 9

  10. 1 :Fins 60 mm long in front of the payload. 10

  11. 1 :Fins 60 mm long in back of the payload. 11

  12. 3 :Fins 120 mm long in front of the payload. 12

  13. 4 :Fins 120 mm long in back of the payload. 13

  14. fins with their moulds 14

  15. FRESH WATER TANK MEASUREMENT SENSORS 15

More Related