1 / 22

TU STORM 2007 High School Autonomous Robotics Competition Introduction

TU STORM 2007 High School Autonomous Robotics Competition Introduction. TU STORM 2007 Robotics Competition. Promote science and engineering Students experienced calibrating sensors, and programming robot controllers for autonomous control of robots. CAD Design Animation

muncel
Download Presentation

TU STORM 2007 High School Autonomous Robotics Competition Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TU STORM 2007High School Autonomous Robotics CompetitionIntroduction

  2. TU STORM 2007 Robotics Competition • Promote science and engineering • Students experienced • calibrating sensors, and programming robot controllers for autonomous control of robots. • CAD Design • Animation • High energy technological competition • Tests students' creativity

  3. TU STORM Programming Competition • Smart Task Oriented Robotics Missions • Every team is issued a TU designed and built robot mechanically capable of completing each mission • These robots are controlled only by the autonomous programs written by the students

  4. TU STORM Robot Description • Controller • Sensors • Human interface • Motion • Arms & Tools • Power requirements • Rigid frame: 2" x 4" aluminum tubing

  5. Controller • IFI Mini Robot Controller. • Microchip 18F8520 PICmicro microcontroller • rated at 10 MIPS. • The digital input sampling frequency is 100KHz • Analog input access time is 10mSec. • 16 digital/analog I/O pins, • 8 PWM outputs (2mSec - 17mSec).

  6. Controller • C/C++ with Microchip's MPLab compiler. • RS232 serial port for programming (115kb). • Memory space is 32K with • Variable space of 1800 bytes • 1024 bytes EE2.

  7. Sensors • One digital infrared reflective sensor • Can detect banner tape up to 12 feet away • Two short range digital infrared sensor (B/W) • Can detect high contrast color at short distances. • Two infrared distance sensors • Two wheel encoders • One digital compass

  8. Human interface TU STORM robots have other inputs for human interface. • There are three digital switches • used to set parameters for the autonomous program. • A potentiometer designed for calibrating the sensors and trimming the R/C servos.

  9. Arms & Tools • Robot Arm • Pan and Tilt

  10. Motion • Two dense foam wheels • Powered by modified heavy duty R/C servos. • The PWM outputs from the controller are used to drive the R/C servos. • A plastic ball skid as a third point of contact to the terrain. The robot can turn with a zero degree radius.

  11. Power requirements • The main battery is a Ni-Cad 6 cell 7.2v RC battery that can be quickly charged in 15min. • The second battery is a 9v used for the infrared sensor.

  12. TU STORM 2007 Dates • Competition Workshops and Kickoff Thursday October 22, 5:30 PM • Trial Competition Saturday November 3, 2:00 PM • Competition Day Saturday November 17, 12:30 PM • KEH Atrium, University of Tulsa 441 S. Gary, Tulsa, OK

  13. TU STORM 2007 Staff • Dr. J. C. Diaz, Professor of Computer Science • Kyle Johnson, Computer Science, M.S. Student • Nick Malone, Computer Science, M.S. Student • Oly Mistry, Computer Science, M.S. Student • John Porter, Computer Science, M.S. Student • Ian Zedalis, Computer Science, M.S. Student

  14. TU STORM 2007 Missions • The 2007 competition will showcase five different missions. • Three missions will involve programming the TU STORM robots. • One mission will involve completing the CAD design in Inventor of a robot for a FIRST type of competition. • Another mission will involve completing an animation in 3ds Max. • The specifics of each mission will be announced at the end of the kick-off

  15. TU STORM 2007 Kick-off Workshops • Programming the Robot Controllers • using previous missions for review • programming details of new tools and sensors • CAD design using Inventor • use FIRST components to make a simple design • Animation workshop using 3ds Max

More Related