Government-Industry Data Exchange Program GIDEP as a Resource

1. Government-Industry Data Exchange Program GIDEP as a Resource Presentation for the Code 300 Orientation June 15, 2012 Presented by: Michael J. Sampson, Alert Coordinator Manager, EEE Parts Program NASA GSFC, Greenbelt, MD 20771 Code 300 Phone: 301-614-6233 Michael.J.Sampson@nasa.gov

2. Office of Management and Budget Policy Letter No. 91-3 Reporting Nonconforming Products 4. Policy. Agencies shall review existing programsor, where necessary, establish new programs to assure the quality of purchased products and materials. Information shall be exchanged among agencies about nonconforming products. The existing Government/Industry Data Exchange Program (GIDEP)operated by the Department of Defense will serve as the central data base for receiving and disseminating information about such products. April 9, 1991

3. GIDEP Sponsoring Agencies NASAUS Army US Navy US Air Force Defense Logistics Agency Defense Contract Management Agency Department of Energy Canadian Department of National Defence

4. GIDEP ReportingHierarchy at GSFC SMA Director J. Bruner SMA Deputy Director M. So SMA Associate Director E. Isaac Alert Coordinator M. Sampson

5. GIDEP Document Types:Alerts and Safe-Alerts Alert: A GIDEP document that reports a problem with parts, components, materials, specifications, software, manufacturing processes, or test equipmentthat can cause a functional failure. Example: • Suspect Counterfeit Delay Lines (August, 2008): The GSFC issued this Alert after a GSFC contractor procured 2 lots of suspect counterfeit delay lines from a distributor. Safe-Alert: A GIDEP document that reports a non-conforming item, product or situation that creates a safety hazard for personnel or equipment. Example: GIDEP Safe-Alert H6-S-12-01 (January, 2012): The GSFC issued this Safe-Alert after a project experienced an exploding wet electrolytic tantalum capacitor with hazardous electrolyte release as a result of having been installed backwards on the PWB.

6. GIDEP Document Types:Problem Advisories and Agency Action Notices Problem Advisory: A GIDEP document that reports a problem with parts,components, materials, manufacturing processes, specifications, software, manufacturing processes, or test equipment that has an unknown or low probability of causing problems for other users. Example: Silicone Contamination in Syringes (March, 2012):The GSFC created a GIDEP Problem Advisory after a flight project reported that syringes for dispensing resins were the prime suspect for silicone contamination. Agency Action Notice: A GIDEP document that redistributes problem information issued by a Government Agency to GIDEP participants. Example: Fluke T2 Safety Notice and Recall October, 2009): The US Department of Energy issued this notice on a Fluke T2 tester that “locks up” in certain applications.

7. Incoming GIDEP Document Process • Per NPR and GPG requirements, an engineering review of the following documents is performed: Alerts, Safe-Alerts, Problem Advisories, and Agency Action Notices. In addition, NASA Advisories (NASA document for exchanging significant parts, materials and safety problems or concerns among NASA activities) are reviewed. • Based on review, the documents are distributed as appropriate. • Project (or affected Code) responses are required and documented in GSFC closed loop system. Alerts Distributed Responses Received

8. Alerts as a Resource Alerts and Advisories are VERY Effective Methods for Communicating Lessons Learned • Disposition is Usually Contractually Imposed • Most Contractors are Long-Time Participants and Have Well-Developed Response Processes • Market Recognition • Well-Developed NASA Closed Loop Process

9. Alerts Reportsand Metrics • Alert Coordinator reports at Code 300 monthly, status report meetings • Reports on close-out status for reportable alerts • Reports include metrics, issues and new concepts • Examples from November’s pre-MSR follow

10. GIDEP Alert StatusNear-term Launches

11. Project GIDEP StatusSummary

12. Project GIDEP Status

13. GIDEP Project StatusRecent Alerts Code 300

14. GIDEP Safety Alert StatusOverdue Responses • The Code 700 Safety Representative closed out 4 of the 5 overdue safety Alerts. Currently, there are two open Code 700 safety Alerts – the overdue one on battery packs for cordless tools along with a Consumer Product Safety Commission notice involving the recall of Lenova desktop computers that was issued in May. • The Code 700 Safety Representative has accepted a position in Code 400; however he has agreed to remain on cc. distribution for future safety Alerts until August 1st and has confirmed that he will assist the new Safety Representative in processing safety Alerts. A new Safety Rep. has been appointed; he is being trained.

15. In conclusion, GIDEP is a Resource • Alerts, Safe-Alerts, Advisories, and Agency Action Notices are free.These documents are very helpful in ensuring mission success • Obtain free calibration reports to maintain equipment calibration • Engineering and Reliability-Maintainability reports are available • Utilize Urgent Data Requests to locate surplus parts and materials • Urgent Data Requests also can be used to request failure experience data • Free reports are also available on Lessons Learned, DMSMS, and Product Change and Product Information Notices • GSFCNASA Advisories are freely distributed with no distribution restrictions. GSFCNASA Advisories capture valuable Lessons Learned

16. The Alert Process is Two-Way • Almost Every Project in NASA Will Benefit from the Information Provided by GIDEP Documents and NASA Advisories • We Have A Legal and Ethical Obligation to Contribute Our Lessons Learned • So Please Do Your Part and Report Candidate Incidents or Experiences • We Will Make it Easy

17. Contact Us Michael J. Sampson,Building 15 Room 210A. Phone: 614-6233michael.j.sampson@nasa.gov Building15 • Edward Rutkowski,Building 15, Room 210. Phone: 614-5793edward.rutkowski-1@nasa.gov