1 / 13

Eric building the fin mount.

Eric building the fin mount. Brenton gluing the body tube. Eric attaching the fin mount to the body tube. Eric gluing the shock cord mount. Brenton installing the shock cord . Brenton attaching the shock cord & parachute to the nose cone.

osma
Download Presentation

Eric building the fin mount.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Eric building the fin mount.

  2. Brenton gluing the body tube.

  3. Eric attaching the fin mount to the body tube.

  4. Eric gluing the shock cord mount.

  5. Brenton installing the shock cord.

  6. Brenton attaching the shock cord & parachute to the nose cone.

  7. Eric installing the assembled nose cone with the attached parachute and shock cord into the body tube with three squares of recovery wadding.

  8. Max relaxing.

  9. Eric putting in the igniter for the engine (after engine was installed.) Max

  10. Brenton assembling the launch pad.

  11. Eric placing the rocket on the launch pad.

  12. Brenton decorating the rocket.

  13. The completed rocket and its builders.

More Related