370 likes | 489 Views
Leading By Example and Accelerated Energy Program Joint Meeting March 12, 2013. Agenda. Introductions LBE/AEP Goals State and National Context LBE & AEP Updates Project Highlight: Wrentham/Hogan Project Discussion Break-Out Project Tour. Massachusetts Clean Energy Goals.
E N D
Leading By ExampleandAccelerated Energy Program Joint MeetingMarch 12, 2013
Agenda • Introductions • LBE/AEP Goals • State and National Context • LBE & AEP Updates • Project Highlight: Wrentham/Hogan Project • Discussion Break-Out • Project Tour
Laws & Goals Drive Investments,Create Economic & Environmental Opportunity • Leading by Example Executive Order 484 • Green Communities Act (GCA) • All cost effective energy efficiency • Green Communities (110/45%) • Advanced building energy codes (122) • Global Warming Solutions Act (GWSA) • Clean Energy and Climate Plan set GHG emission reduction goals at 25% below 1990 Baseline Levels by 2020; 80% reduction by 2050 • Governor Patrick’s Renewable Energy Goals • Install 250 megawatts of solar capacity by 2017 • Install 2000 megawatts of wind capacity by 2020
Green Communities Designation 110 cities and towns designated Green Communities More than $24 million invested to implement energy efficiency and renewable technologies Total reduction of 1,809,059 MMBTUs committed, equivalent to the annual energy consumption of approximately 13,600 Massachusetts households
Executive Order No. 484 Issued April 2007 by Governor Deval Patrick • Sets state agency goals for • GHG emission reductions • Energy reductions • Renewable energy • Requires all new construction to meet Mass. LEED Plus Standard • Includes executive agencies, community colleges, state universities, Trial Court • Highlights to Date • Over $200 million worth of investments in large-scale energy efficiency projects • $9.7 million in ARRA funding invested in real time energy meters at 25 million SF • State agency reduction in use of heating oil by over 13 million gallons from 2006, a 60% decrease.
$54.9 million ARRA Grant • SOLAR - $14.4m • DCAM, CEC, Authorities • 9.5 MW installed • Leveraged over $38 million • LEADING BY EXAMPLE - $16.2m • Real-time energy management • DCAM staff resources for energy projects • Low-E Ceilings at DCR Ice Rinks • Utility Incentives • HIGH PERFORMANCE BLDGS-$19.5m • Deep Energy Retrofits • Transformative Technology • Oil Heat Efficiency • Community Mobilization • Western Mass. Rebuild Prog
ARRA Overall Impacts 10.5 MW Solar 2,500 people put to work $200 million in additional funds leveraged Over 300 projects funded throughout the Commonwealth Millions of dollars in energy cost reductions
Nation-Leading Energy Efficiency Goals * Per DPU order 1/31/13
Massachusetts Building Energy Codes • Massachusetts base code tied to IECC – updated every 3 years • First in nation stretch code adopted voluntarily by 122 communities, which requires energy performance 20% better than code
Renewable Resources Wind • Patrick/Murray Administration Goals • Solar: 250 MW installed by 2017 • Wind: 2000 MW installed by 2020 Solar PV Biomass
Renewable Energy & On-Site Generation Commonwealth Solar -SRECs & net metering providing huge boost to solar PV Commonwealth solar thermal program Biomass & Heat Pumps -MassCEC & DOER rolling out new incentives – Biomass incentives now live Combined Heat & Power - Development of APS and utility incentives leading to significant growth
Clean Energy Industry Provides Jobs Industry Report: Massachusetts’ Clean Energy Sector is Large, Diverse, and Growing • Clean Energy Sector • From July 2011 to July 2012, industry grew 11.2% • 71,523 people employed at 4,995 clean energy firms • 1.7% of total Massachusetts workforce
Massachusetts’ Clean Energy Leadership • Governor Patrick awarded 2012 Green Governor of the Year Award
Major Accomplishments AEP Press Release and Kick-Off Event AEP Certification Designation Innovative Utility Vendor Contracting Ramping Up Energy Efficiency Audits Agency Survey Results Commissioner Cornelison & Commissioner Sylvia announcing the AEP to the public on Jan 15th, 2013.
We plan to retrofit In a total of We have With And AEP Sites Working days Sites In Progress Sites Complete* Sites Initiated. 700 700 204 32 172 Program Status (as of Q4 2012) *In order to achieve AEP Completion, small projects must complete construction, large comprehensive projects must enter construction, and new review projects must complete an energy audit.
Schedule Status • We will have initiated or completed 204 Sites by the end of Q4 2012.
AEP Completed Sites AEP Complete: 32 Sites (Includes 12 sites that have completed construction and 20 sites in construction) In Q4 2012, DCAMM completed retro-commissioning of the HVAC system in the Taunton Career Center. The effort cost $27,000 and yielded $13,500 in annual energy savings.
AEP Initiated Sites AEP Initiated: 172 Sites • RFP (estimated $24 million) to retrofit the Erich Lindemann and John W. McCormack buildings in Boston. • An audit was completed on the GardnerDistrict Court by a Utility Vendor.
AEP Sites by Certification Group Across the entire AEP portfolio, DCAMM and DOER will target a 25% reduction in energy consumption, greenhouse gas emissions, and energy costs. Consistent with statewide goals, DCAMM and DOER will prioritize energy efficiency.
AEP Certification Large Site Springfield Technical Community College Current Status: RFP Issued On schedule to achieve AEP Certification from a reduction of over 25% in energy use, energy cost, and GHG emissions. Small Site Taunton Career Center Current Status: In Construction Will achieve AEP Certification upon construction completion for reaching reduction of over 20% in all three categories. Occasional Use Site Salisbury Beach State Park Current Status: Audit Complete The energy audits of the site identified eight (8) ECMs that, upon implementation, will enable the site to achieve AEP Certification.
Innovative Utility Vendor Contracting DCAMM is signing direct contracts with utility vendors with the authority of the MA Green Communities Acts. These contracts will use pricing already negotiated by utility companies. In December 2012, RISE Engineering (a division of Thielsch Engineering, Inc.) became the first vendor to execute the new DCAMM Utility Vendor contract. In Q1 2013, DCAMM will be reaching out to ALL utility vendors to offer participation in program. Deputy Commissioner Sandra Duran congratulates Thielsch’s Vice-President Vin Graziano on becoming a DCAMM approved Utility vendor
Mass Energy Insight (MEI) • MEI is a free, web-based tool provides consumption data and delivers customized, easy-to-use reports • Tracks monthly account energy use for Massachusetts state agencies for electricity and natural gas through automatic downloads • MEI is provided at no cost to state agencies by DOER as part of the Leading By Example program. • Submit user names by March 15, 2013 to receive login information and access. Trainings will start this spring. • Currently 13 agencies have requested user names
Enterprise Energy Management System • Real-time energy metering at 25 million square feet of state buildings • 18 Colleges, Prisons, 4 Hospitals, Downtown Offices, 5 Courts • Target larger buildings and complexes • Provide building level information for all fuels • Actionable on-line information for comparisons and immediate response • Contract with EnerNOC until fall 2014
EEMS Example 1: UMass Lowell Tsongas Center
EEMS Example 2: Fitchburg State University
LBE Grant Programs 2012 Program - $2 million On-site clean power • Awards made to: • $600,000 to BRC wind turbine • $ 75,514 to MCC for GSHP project • $ 38,300 to QCC for solar thermal • $387,000 to UMass Amherst CHP inlet cooling system • $165,000 to DCR for comprehensive renewable analysis at George’s Island • $700,000 remaining – Applications accepted through 3/18 • Free bulb and water saving fixture program through utilities
LBE Grant Programs 2013 Programs • $1.2 million for solar thermal projects – funds from MassDEP GHG trust • $2 million for thermal technologies such as biomass/pellets, heat pumps, solar thermal • $1.5 million for parking lot solar PV arrays and other innovative PV technologies • Free water saving fixtures
Renewable Thermal Technologies • Biomass: highly efficient, variable systems with low air emissions • Using wood or other biomass such as grasses, in the form of cordwood, pellets or chips • Solar Hot Water: collectors providing additional heat for space heating, domestic hot water, process heat or other low temperature heating needs • Heat pumps: highly efficient systems of compressors/expanders and heat exchangers using the thermal energy of ambient air, water or underground to heat and cool buildings • Attention: account for electricity consumption by pumps and compressors • Advanced biofuels: biomass derived liquid fuels delivering at least a 50% reduction in lifecycle GHG emissions • Biogas: digester gas from Anaerobic Digestion or capped landfills used for heating purposes at the site of capture, or by mixing it in the natural gas pipelines.
PROJECT HIGHLIGHT Hogan Regional Center & Wrentham Developmental Center Energy and Water Retrofit Construction Began:October 2011 Substantial Completion: February 2013 DCAMM, the Department of Developmental Services (DDS), J.C.Cannistraro and KlingStubbins have recently completed large-scale energy upgrades at the two facilities. Measures included power plant decentralization, solar PV installation, lighting upgrades, and HVAC improvements. The upgrades are on track to save nearly $2.5 million in energy costs annually. The 500kW solar PV installation at Wrentham will save over 6 million kWh of electricity annually.
Discussion Break-Out • Specify a sustainability project you have been able to implement using your own internal resources and some of the key benefits to your facility • Discuss the top 2-3 key reasons you were able to successfully implement this project • Identify ways in which DCAMM, LBE or other state agencies could be helpful in ensuring that these types of projects can be implemented on a wider scale
Thank you and please join DCAMM and Cannistraro for a tour of Wrentham’s upgraded power plant and 500 KW ground-mounted solar PV installation.