1 / 13

ALU Design

ALU Design. Digilab XL. LEDs. 7-segment displays. pushbuttons. switches. Structural VHDL. Clock Module: osc_4k. library IEEE; use IEEE.std_logic_1164. all ; use IEEE.std_logic_arith. all ; entity osc_4k is port ( clk: out std_logic ); end osc_4k;.

sakina
Download Presentation

ALU Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ALU Design

  2. Digilab XL LEDs 7-segment displays pushbuttons switches

  3. Structural VHDL

  4. Clock Module: osc_4k library IEEE; use IEEE.std_logic_1164.all; use IEEE.std_logic_arith.all; entity osc_4k is port ( clk: out std_logic ); end osc_4k;

  5. architecture xilinx of osc_4k is component OSC4 port ( F490: out std_logic ); end component; component BUFGS port ( I: in std_logic; O: out std_logic ); end component; signal f: std_logic; begin xosc4: OSC4 port map ( f ); xbufgs: BUFGS port map ( f, clk ); end xilinx; 490 Hz Can change to: F15 F16K F500K F8M

  6. ALU Design b(7:0) a(7:0) sel y “00” a + b “01” a + 1 “10” not a “11” shift left a ALU sel(1:0) y(7:0)

  7. ALU Entity library IEEE; use IEEE.std_logic_1164.all; use IEEE.std_logic_unsigned.all; entity alu is port ( a: in STD_LOGIC_VECTOR (7 downto 0); b: in STD_LOGIC_VECTOR (7 downto 0); sel: in STD_LOGIC_VECTOR (1 downto 0); y: out STD_LOGIC_VECTOR (7 downto 0) ); end alu;

  8. architecture alu_arch of alu is begin alu1: process(a,b,sel) begin case sel is when "00" => -- a + b y <= a + b; when "01" => -- 1+ y <= a + 1; when "10" => -- invert y <= not a; when "11" => -- 2* y <= a(6 downto 0) & '0'; when others => null; end case; end process alu1; end alu_arch;

  9. Structural VHDL

  10. T3main.vhd library IEEE; use IEEE.std_logic_1164.all; entity T3main is port ( SW: in STD_LOGIC_VECTOR (1 to 8); BTN: in STD_LOGIC_VECTOR (1 to 4); LD: out STD_LOGIC_VECTOR (1 to 8) ); end T3main;

  11. architecture T3main_arch of T3main is component mux2 port( a : in std_logic_vector(7 downto 0); b : in std_logic_vector(7 downto 0); sel : in std_logic; y : out std_logic_vector(7 downto 0)); end component; component alu port( a : in std_logic_vector(7 downto 0); b : in std_logic_vector(7 downto 0); sel : in std_logic_vector(1 downto 0); y : out std_logic_vector(7 downto 0)); end component;

  12. component reg port( d : in std_logic_vector(7 downto 0); load : in std_logic; clr : in std_logic; clk : in std_logic; q : out std_logic_vector(7 downto 0)); end component; component debounce port( inp : in std_logic; clk : in std_logic; clr : in std_logic; outp : out std_logic); end component; component osc_4k port( clk : out std_logic); end component;

  13. signal tin, T, N, y: std_logic_vector(7 downto 0); signal clr, clk, clk4: std_logic; begin U0: mux2 port map (a => y, b => SW, sel => SW(1), y => tin); Treg: reg port map (d => tin, load => SW(2), clr => clr, clk =>clk, q => T); Nreg: reg port map (d => T, load => SW(3), clr => clr, clk =>clk, q => N); U1: alu port map (a => T, b => N, sel => SW(4 to 5), y => y); U2: debounce port map (inp => BTN(4), clk => clk4, clr => clr, outp => clk); U3: osc_4k port map (clk => clk4); clr <= BTN(1); LD <= T; end T3main_arch;

More Related