1 / 19

BRX210 ‘Mechanical Blueprint Reading’

BRX210 ‘Mechanical Blueprint Reading’. Unit #10 Angles. After studying this unit, you will be able to:. Identify a chamfer and interpret its size Define the term ‘taper’ and interpret the meaning of TPF and TPF Perform calculations using taper data Define the term ‘bevel’

unity-pope
Download Presentation

BRX210 ‘Mechanical Blueprint Reading’

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BRX210 ‘Mechanical Blueprint Reading’ Unit #10 Angles

  2. After studying this unit, you will be able to: • Identify a chamfer and interpret its size • Define the term ‘taper’ and interpret the meaning of TPF and TPF • Perform calculations using taper data • Define the term ‘bevel’ • Define the term ‘chamfer’

  3. CHART-DOWEL – SPLIT TYPE QUIZ 4005148 4005148 .390/.370 4005149/4005851 WAS .06/.10 SAE 1010 STEEL +/- 2° .20° 606 GO-NO GO RING NONE ENGINEERING CHANGE REVISION .004 BECAUSE THE PART HAS A SPLIT B (11” x 17”) .015 .580 .410 .510 4005307

  4. REAR PRESSURE ROLL SWING LINK QUIZ • .316 • 2024-T4 ALUM. • ¼ (.250) • 2 • 5/16 • 3 • ½ • AUTO. 640 • CONTOUR CHANGE • +/- .002 • .1065 • 5/16 • FJS • +/- ½° • YES • 640-0301 • 45° • 1/8 • 2 • 45°

  5. TAPERED RIVET QUIZ • 1.165 • .375/.365 • .365/.140/.052 • +/- .005 • .180 • .416 • .006 • 3:1 • BILATERAL • .12 • NONE • .035 TPI • 1018 STEEL • 15–1/2° • .060/.052

More Related