280 likes | 312 Views
There are some equipments and its steps in order to change flat tire which is important to know.
E N D
Tips To Change A Flat Tire
There are some equipments and steps in order to change flat tire which is important to know.
Materials Required Materials Required JACK BRICKS
SPARE TIRE LUG WRENCH
Make sure you should follow owner’s manual before changing a flat tire
Step 1 Make sure that your car is parked on a flat road and the emergency brake is engaged.There should not be any other cars parked at your near-by areas.
Place bricks or rocks at front and back of the wheel in order to block them and it will be comfortable for you to change flat tire.
Step 3 Lay out the spare tire, lug wrench and jack
Attach the lug wrench to the nuts and turn it counterclockwise one-by-one until it is loosened.
Place the jack at one side of the car and jack the car up until it is off the ground.
Try to remove all nuts at once and keep it them all together so that it won’t roll and remove the tire.
Mount the spare tire on wheel lugs and check your tire pressure on a regular basis.
Begin tightening nuts one-by-one using lug wrench
Remove the jack and lower down your car so that it will touch on the ground.
Visit your near-by garage to check the spare tire’s speed.
Hope you have followed and liked the Hope you have followed and liked the steps. steps.
This slide is done by... SAILUN TIRE #1 Tire Supplier In The Philippines