1 / 7

CEA 3D Update to IEC TC100 AGM

CEA 3D Update to IEC TC100 AGM. Jon Fairhurst 19-May-2010. CEA A trade association for the Consumer Electronics Industry in the US Responsible for CES Trade Show Accredited by ANSI for developing US standards 3D efforts in CEA 3D Uncompressed Interface (R4.8 WG7) 3D Glasses (R4 WG16)

alair
Download Presentation

CEA 3D Update to IEC TC100 AGM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CEA 3D Updateto IEC TC100 AGM Jon Fairhurst 19-May-2010

  2. CEA • A trade association for the Consumer Electronics Industry in the US • Responsible for CES Trade Show • Accredited by ANSI for developing US standards • 3D efforts in CEA • 3D Uncompressed Interface (R4.8 WG7) • 3D Glasses (R4 WG16) • 3D Promotion

  3. Uncompressed Interface 3D Project • Project allocated to R4.8 WG7 • 3D Task Force disbanded • New promotional group created • Task: to extend CEA-861 • CEA-861 currently used by HDMI • CEA-861 is not interface specific: may be used by other interfaces

  4. Uncompressed Interface 3D Project • Standard: “CEA-861.2, 3D Extensions” • CEA-861E includes EDID for negotiating media format from source to sync • CEA-861.2 • Adds 3D InfoFrame and EDID CEA 3D data block • Supports all 3D structures used in HDMI 1.4 • Liaison worked to add 3D structures to HDMI for completeness • Benefit to consumer: manual switching to match source and sync formats unnecessary

  5. 3D Glasses Standardization in CEA • R4 WG16 formed • Scope: IR-Synchronized Active Eyewear • Developing a full requirements list before specifying details • Solution • Standardize IR emitter-to-eyewear signaling • Address interference/susceptibility • Allow/Facilitate interoperability with legacy systems

  6. IR emitter-to-eyewear signaling to include • Wavelength • Carrier frequency • Burst patterns • Codes • Timing • Frequency range • Maximum distance requirement • LC shutter polarization • Power-down • Modes • Pairing automation

  7. Thank you

More Related