320 likes | 486 Views
NOTICE : This presentation was given at the March 2008 “ Lunch N Learn ” at Ellison Technologies in Charlotte. The presentation is meant to be viewed with the narration and detailed explanation of the presenter. Part 3 : Best Fit of Bore Pattern. True Position of the Three Holes. 3x.
E N D
NOTICE : This presentation was given at the March 2008 “Lunch N Learn” at Ellison Technologies in Charlotte. The presentation is meant to be viewed with the narration and detailed explanation of the presenter. True Position Bore Pattern
Part 3 : Best Fit of Bore Pattern Understanding True Position
True Position of the Three Holes 3x 10 10 10 Ø 0.2 A B C Ø 0.1 A C 10 20 -A- B True Position Bore Pattern
The Top “tier” controls the feature positions relative to the Datum Reference Frame. The tolerance zone is FULLY CONSTRAINED to the Specified Datums. This ensures the holes are located properly on the part. This is a True Position with a COMPOSITE TOLERANCE. Ø 0.2 A B C Ø 0.1 A The Bottom “tier” controls the pattern of holes to themselves, without positional or rotational constraints, in this case. This ensures that the pattern itself will mate with the joining part’s hole pattern. True Position Bore Pattern
Top Tier 3x 10 10 10 Ø 0.2 A B C C 10 20 -A- B True Position Bore Pattern
X 10 Y 30 Dia = 0.2 X 30 Y 30 Dia = 0.2 X 20 Y 20 Dia = 0.2 Top Tier Tolerance Zone Location 3x 10 10 10 Ø 0.2 A B C C 10 20 -A- B True Position Bore Pattern
Bottom Tier 10 10 3x Ø 0.1 A 10 -A- True Position Bore Pattern
Bottom Tier Zone Location 10 10 3x Ø 0.1 A Dia = 0.1 10 -A- True Position Bore Pattern
10 10 10 Bottom Tier Zone Location 3x Ø 0.1 A Dia = 0.1 -A- True Position Bore Pattern
10 10 10 Bottom Tier Zone Location 3x Ø 0.1 A Dia = 0.1 -A- True Position Bore Pattern
10 10 10 Bottom Tier Zone Location 3x Ø 0.1 A Dia = 0.1 -A- True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Let’s Check the Top Tier. -A- True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Ø 0.2 A B C Good! -A- True Position Bore Pattern
In Calypso…… True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Let’s Check the Bottom Tier. Ø 0.2 A B C Ø 0.1 A -A- True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Ø 0.2 A B C Ø 0.1 A -A- True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Ø 0.2 A B C Ø 0.1 A -A- True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Ø 0.2 A B C Ø 0.1 A -A- True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Ø 0.2 A B C Ø 0.1 A -A- True Position Bore Pattern
An Example… Here are ACTUAL center points. Are they in Spec? Ø 0.2 A B C Ø 0.1 A BAD! -A- True Position Bore Pattern
In Calypso…… True Position Bore Pattern
Ø 0.2 A B C Ø 0.1 A True Position Bore Pattern