1 / 3

Design of Rib for SVD2

Design of Rib for SVD2. Y.Yamada at SVD meeting on Apr. 19, 2001. Gravitational sag of ladder supported at both edge : sagS = 5wL 4 /384EI ~ 28 m m for SVD1-3rd-layer fixed at both edge : sagF = wL 4 /384EI ~ 6 m m for SVD1-3rd-layer

cece
Download Presentation

Design of Rib for SVD2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Design of Rib for SVD2 Y.Yamada at SVD meeting on Apr. 19, 2001 • Gravitational sag of ladder • supported at both edge : sagS = 5wL4/384EI ~ 28mm for SVD1-3rd-layer • fixed at both edge : sagF = wL4/384EI ~ 6mm for SVD1-3rd-layer • w(N/m):line density, L(m):length, E(N/m2):Young’s modulus, • Design of Rib for SVD2 • Zylon : FRP with zero electric conductivity and E ~ 50GPa • sagF ~ 5 mm for 4th and 5th layer • same X0 (~0.16%) with BN rib in SVD1 (X0 : Si~9.4cm, Zylon ~26cm, CFRP ~24cm) • CTE : Si ~ 3106, Zylon ~ 6106, CFRP ~ 1106

More Related