1 / 12

Install Instructions

Install Instructions. August 1, 2008. Standard Knock-out plates need to be removed from the machine. You will receive a Template in your User Manual for all Knock-out Plates. For the four small holes – use a 7/32 drill bit For the two larger holes – use a 3/8 drill bit

cherie
Download Presentation

Install Instructions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Install Instructions August 1, 2008

  2. Standard Knock-out plates need to be removed from the machine

  3. You will receive a Template in your User Manual for all Knock-out Plates

  4. For the four small holes – use a 7/32 drill bit • For the two larger holes – use a 3/8 drill bit • Carefully drill holes on the appropriate Knock-out plate to the exact dimensions of our template. • Reinstall Knock-out plate on the machine before adding Microtronic Msmart hardware.

  5. Finished Product

  6. This is what you receivein your Msmart Kit MDB Connector Cable Velcro Cable from “Reader Head plug” to “Head” Reader Reader Antenna or Head Cable from “ANT” on Reader to plug on “Head”

  7. Plug in details MDB Cable will connect with Black end into “VMC” port on Reader White MDB plugs go from the Vending Machine and Validator or Coin Mech White plug from “Head” to “HEAD” port on Reader Cable with Gold plug on both ends for “ANT” port on Head

  8. Before Installation • Make sure all power is turned off to the Vending Machine • Have pre-drilled Knock-out Plate ready • You will need a Phillips Head Screwdriver and an 11/32” Nut Driver • On National Vending machines you may also need a ¼” Nut Driver for easier removal of the Knock-out Plate

  9. Connection to the Vending Machine Reader mounted with Velcro provided in kit Cables from Reader to Head Head is mounted with 4 screws provided in kit Make sure cables are not in the way by strapping them together. Predrilled Knock-out Plate installed

  10. Green Light is “Ready to Go”

  11. Vending Machines with Keypad • Press “Machine Config” • Arrow down to “Card Reader” • Select “MDB CARD” • Arrow down to “Revalue” • Select “ON” if you want the machine to also Load Value to the Microtronic Media or “OFF” if not. • Press “Exit” • You should then have a “Green” light and you are again . . . • READY TO GO!

More Related