1 / 21

Technical Training LAB Models D-Line

Technical Training LAB Models D-Line. Characteristics. Fully Automatic User Friendly Fixed Programs Up to 20 customizable programs Available from 28 to 160 Liters Multilingual Automatic door locking Sterilization Temperature range from 105°C to 137°C

duncan
Download Presentation

Technical Training LAB Models D-Line

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Technical Training LAB Models D-Line

  2. Characteristics • Fully Automatic • User Friendly • Fixed Programs • Up to 20 customizable programs • Available from 28 to 160 Liters • Multilingual • Automatic door locking • Sterilization Temperature range from 105°C to 137°C • Automatic message for maintenance or filter replacement

  3. New features • Stores the last 100 cycles • Up to 10 fixed programs • Up to 20 customizable programs • Up to 30 identification codes and passwords for level control • Two PT100 sensors according to ISO 61010-40 or EN 61010-40 • Up to 6 temperature sensors and 4 pressure sensors can be connected • Controller and software complies with CFR part11 • Several options possible • Optional programs or features: • F0 control ( optional) • Disinfection/Isothermal Temperature range from 60°C to 105°C • Optional Independent Recording for cross-checking cycle measurements

  4. Vertical Autoclaves

  5. Benchtop Autoclaves

  6. Available options • Fast cooling by water and compressed air • Super fast cooling with Radial Fan • Vacuum pump for pre and post vacuum • Integrated steam generator for tabletop and vertical models • Biohazard filter for air exhaust filtration

  7. Example of a cycle

  8. Piping diagram 2840 EL-PV models

  9. Piping diagram 38XX models

  10. Piping 38XX ELC F G PV

  11. Piping 38XX ELC PV G BH

  12. Piping 38XX ELVC PV

  13. Piping 38XX ELVC PV G

  14. Electrical Diagram AC part

  15. Layout Main & IO board

  16. Analog Inputs

  17. Digital Inputs

  18. Digital Outputs

  19. Electrical diamgram generator

  20. Control system generator

  21. Assistance/parts required? Ifpossible fax/ email printouts of the machine Always giveusserialnumberandtype of the model Parts have tobeorderedby fax/email: order@tuttnauer.nl T:+31 (0)76 54 23 510 F:+31 (0)76 54 23 540 FTP://213.125.139.19 service@tuttnauer.nl http://www.tuttnauer.com

More Related