1 / 13

UCSB 4-Hybrid Thermal Test System Status

UCSB 4-Hybrid Thermal Test System Status. 23 June Sam Burke UCSB HEP Group. Progress. Measured Relative Humidity with System Sensor using sub vi (subroutine) RH = 46.8 +-2.3% with System RH = 49.0 +-0.98% with Sensirion Reference Fabricated Analog Input/Output Board (photo later)

gmurphy
Download Presentation

UCSB 4-Hybrid Thermal Test System Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. UCSB 4-Hybrid Thermal Test System Status 23 June Sam Burke UCSB HEP Group CMS 4-Hybrid Test System Sam Burke EE

  2. Progress • Measured Relative Humidity with System Sensor using sub vi (subroutine) • RH = 46.8 +-2.3% with System • RH = 49.0 +-0.98% with Sensirion Reference • Fabricated Analog Input/Output Board • (photo later) • Fabricated Sensor Input/Output Board • (photo later) CMS 4-Hybrid Test System Sam Burke EE

  3. Progress • Generated Sensor Interconnect Schematics • Air Flow Sensor • Peltier Power Source Constant Current Control • Received dc/dc converter for flow sensors • 12vdc @83mA from 5 vdc on Analog I/O Bd. • Acceptance testing unit [ie. Verify Vo = f (load)] • Reverse Engineering on Coolie Box Relay Board CMS 4-Hybrid Test System Sam Burke EE

  4. CERN Cold Box • Note Following Details • Antenna • Humidity Sensor • Hybrid + Pitch Adapter • Foam Insulation CMS 4-Hybrid Test System Sam Burke EE

  5. CERN Cold Box • Blue lines are N2 • Clear lines are water • Note Hybrid boxes with bar codes CMS 4-Hybrid Test System Sam Burke EE

  6. UCSB Cold Box • Note: • Sensor penetrations • Test Tail Interface • ARC Board • Hybrid/Pitch Adapter on plate • Humidity Sensor and cable • Temperature Sensor and cable CMS 4-Hybrid Test System Sam Burke EE

  7. UCSB Cold Box CMS 4-Hybrid Test System Sam Burke EE

  8. UCSB Cold Box • PENITRATIONS • 1.T/E Power + • 2.T/E Power - • 3. T/E High Temp • 4. Hybrid 1 Temp • 5. Hybrid 2 Temp • 6. Hybrid 3 Temp • 7. Hybrid 4 Temp • 8. Humidity • 9. Pulser (RG58) • 10. Spare • 11. Water IN • 12. Water Out • 13. Dry Air Low • 14.Dry Air High CMS 4-Hybrid Test System Sam Burke EE

  9. Sensor Interface • SENSOR Interface Board (left) • 4ea Hybrid Temps • Box Humidity • High Temp Interlock • ANALOG I/O Board (right) • Air Flow Sensor • Water Flow Sensor • Peltier Current Control Output CMS 4-Hybrid Test System Sam Burke EE

  10. Sensor Interface • Backside of Analog Input/Output Board CMS 4-Hybrid Test System Sam Burke EE

  11. Coolie Box Relay Board • Bench Tested • Red LED (heat) • Blue LED (cool) • Schematic generated CMS 4-Hybrid Test System Sam Burke EE

  12. Future Plans • Fabricate and test all 4 Hybrid Temperature Sensors • Build Power Transformer board • Mount Temp/Humidity Sensors in Cold box CMS 4-Hybrid Test System Sam Burke EE

  13. Future Plans • Design Pitch Adapter Test Antenna • New longer shielded cables for flow sensors • Test Thermoelectric Element Control Function using LabView Code CMS 4-Hybrid Test System Sam Burke EE

More Related