1 / 20

ATM FALCON

ATecoM GmbH Pascalstr. 67 D-52076 Aachen Germany. ATM FALCON. Product Presentation. Target Applications. HQ Video Transmission over broadband networks DVB-T & DVB-C Distribution Services WAN Access Point with High Availability

maeve
Download Presentation

ATM FALCON

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ATecoM GmbH Pascalstr. 67 D-52076 Aachen Germany ATM FALCON Product Presentation

  2. Target Applications • HQ Video Transmission over broadband networks • DVB-T & DVB-C Distribution Services • WAN Access Point with High Availability • Mission critical applications with high-availability requirements

  3. FALCON PSU #1 PSU #2 Controllers #1 #2 Service Cards #1 #2 #3 #4 #5 #6 #7 #8 MUX #1 #2

  4. System Architecture • No “Single Point of Failure” • Redundant High-Speed Serial Links for Data (up to 800 Mbps / Link) • Redundant Ethernet for Control • Local CPU and local storage of configuration on each service card (standalone operation) • Configuration via RS232 or TCP/IP

  5. Redundancy • Dual PSU (AC or DC) • Redundant Control & Data Paths • Dual Line Interface Card • Redundant Control Card • Dual Input on DVB-ASI Input Cards with automatic protection switching • Dual Output on DVB-ASI Output Cards • Support of self healing rings and Add/Drop functions

  6. Service Availability • Hot Swap • Hot Plug • Pre-configuration of Service Cards • Permanent Storage of Configuration • Changing service cards without interruption on other cards • Redundant feeds on service inputs or network interfaces • Controller card optional for remote management, not needed to run services

  7. Base Unit 3RU • 19” rackmountable • All cabling from one side (front or rear) • Redundant PSUs (AC + AC, DC + DC or AC + DC) with current sharing • 2 Slots for controller cards (controller redundancy) • 8 Slots for service cards (with redundancy on it) • 2 slots for traffic aggregation cards (useable for redundant network links) • Hot swap & hot plug for all components (without to switch of or reboot the entire system) • No fans, passive cooling (2 RU slots needed for air intake and output), optional fan device (with redundancy and alarms) available

  8. Base Unit 1RU • 19” rackmountable • Redundant PSUs (AC + AC, DC + DC or AC + DC) with current sharing • 1 Slot for controller cards • 3 Slots for service cards • 1 Slot for traffic aggregation cards • Hot swap & hot plug for all components (without to switch of or reboot the entire system) • Active redundant cooling

  9. SYS-Card & SYS-IB Card • Central configuration and monitoring • Not required for operation • 10BaseT Ethernet port for remote access • 5 alarm contact closures (user programmable) • 4 macro inputs • 10BaseT to each service- and aggregation slot (remote management of service and network cards) • SNMP-Agent supporting SNMPv2c & SNMPv3 • Supports firmware download from remote TFTP servers • SYS-IB additionally with In-band control via CLIP

  10. NIM Card • 10 * Highspeed serial links for data from/to service and CPU slots • 2 * Ethernet Links for Control • Module slot for line interface module • STM-4 optical • STM-1 optical • E3/DS3 • Broadcast to all service cards • Multiplex of ATM cells received from service & control cards • 2Mbit Network clock output, 2Mbit reference clock input

  11. DVB-ASI Input Card • 2 ASI Input with integrated A-B switch • Active loop-through (Monitoring) • MPEG-RS checking and correction • MPEG-TS rate detection • AAL1 and AAL1 FEC support • ATM Shaping • 2 Highspeed serial links to MUX cards • Full VPI/VCI range individual configurable for each link

  12. Quad DVB-ASI Input Card • 4x ASI Input • Configurable redundant DVB-ASI input • Configurable integrated ASI A-B switch (2 input pairs) • DVB-ASI monitoring output • Byte- and Packet mode • 188- and 204 Byte TS-Packet size • MPEG Reed-Solomon error detection • SPTS and MPTS • TS rates from 1.5 to 160 Mbps • AAL1 and AAL1-FEC support • Full VPI/VCI range • Traffic Shaping • Redundant ATM output • Local CPU • Local storage of configuration parameters • Hot-Swap and Hot-Plug

  13. DVB ASI-Output Card • 2 Highspeed serial links from MUX cards • Full VPI/VCI range individual configurable for each link • Detection of ATM cell stream and Protection Switching on ATM level (nearly lossless) • AAL1 and AAL1 FEC support • Adaptive Clock Recovery (ACR) • 2 DVB-ASI outputs (same content)

  14. Quad DVB-ASI Output Card • 4 independent ASI output signals (without APS) • Redundant ATM input possible for each TS • Automatic Protection Switching (APS) configurable • Full VPI/VCI range • AAL1, AAL1 FEC support • High performance adaptive clock recovery • TS rates from 1.5 to 160 Mbps • 188- and 204 Byte TS-Packet size • Generation of MPEG Reed-Solomon • DVB-ASI Byte- and Packet mode • Local CPU • Local storage of configuration parameters • Hot-Swap and Hot-Plug

  15. Quad E1/T1 CES • 4 independent E1/T1 lines • Interface 120 Ohm unbalanced on RJ45 • Structured (n*64k) or unstructured (1.448 / 2Mbps) operation • Reference clock: • Internal clock • External clock (2Mbit) • Network clock • E1/T1 clock • Adaptive

  16. Ethernet Bridge • 10/100BaseT Ethernet Bridge • Up to 16 independent VCCs • QoS configurable per VCC • Support of VLAN-tagged frames • Multicast aware • STP (Spanning Tree Protocol)

  17. ATM Tributary Card • 2 Highspeed serial links from NIM cards • 2048 VCCs (point-to-point or point-to-multipoint) • On each VCC Policing & Shaping • VPI/VCI remapping • STM-4, STM-1, or E3/DS3 Line Interface • 2Mbit network clock output, 2Mbit reference clock input

  18. Ring Control Card • Forwarding between NIM cards • Individual configuration for both directions • Drop, Pass & Loop of individual VCCs • Statistics per VCC • Useful to create ATM rings and to handle closed loops and Add/Drop functions

  19. Currently Available • Base unit 1RU & 3RU • AC & DC power supply • SYS card (hub for central control/monitoring, 4 macro inputs, 5 alarm outputs) • SYS-IB card (cpu for central control/monitoring, 4 macro inputs, 5 alarm outputs, CLIP In-band Management) • NIM card • Line Interface Modules • STM-4 optical (SingleMode S1.1, L1.1 and L1.2, BiDi) • STM-1 optical (Multimode, Singlemode S1.1, L1.1, and L1.2, BiDi) • STM-1 electrical • PDH E3/DS3 • Quad PDH E3/DS3 (for Tributary Card only)

  20. Currently Available (cont.) • Service Cards • DVB-ASI Input Card • Quad DVB-ASI Input Card • DVB-ASI Output Card • Quad DVB-ASI Output Card • 4*E1/T1 CES Card • Ethernet Bridge Card • ATM Tributary Card (with STM-4, STM-1, E3/DS3, Quad E3/DS3) • Ring Controller Card

More Related