1 / 5

FTK Rear Transition Card

FTK Rear Transition Card. Board Review. Mircea Bogdan The University of Chicago March 12, 2013. FTK Rear Transition Card. Block Diagram. 9U VME Rear Transition Card I/ Os : 2 x QSFP (8 x RxTx @ 6Gbps) 1 x SFP (1 x RxTx @ 2Gbps) P3 Connector: - 12 x Out @ 2Gbps 16 x In @ 2Gbps

qabil
Download Presentation

FTK Rear Transition Card

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FTK Rear Transition Card Board Review Mircea Bogdan The University of Chicago March 12, 2013

  2. FTK Rear Transition Card Block Diagram • 9U VME Rear Transition Card • I/Os: • 2 x QSFP (8 x RxTx @ 6Gbps) • 1 x SFP (1 x RxTx @ 2Gbps) • P3 Connector: - 12 x Out @ 2Gbps • 16 x In @ 2Gbps • P2 Connector: • - VME: Data, Addr, Aux • - HOLDs to Input FPGAs (4+8) • - HOLDs from Processor FPGAs (4x4) • - FREEZE In, Out

  3. FTK Rear Transition Card Power Supply Issues • Power Requirement Estimate (4 Processor FPGAs, 4 RLDRAMs, 2 Input FPGAs): • Power consumption per Processor FPGA ~ 12W • Power consumption per Input FPGA ~ 3 W • Total Power Consumption Estimate ~ 70-75 W per card Supply Options per Slot (Front Modules DO NOT draw any +5V current): P2/P0: +5V rated for 18.5/11.5A (20C/70C), total: 57.5W to 92.5W. P0: Vw, Vx, Vy, Vz: at +5V rated each for 4A/3A (20C/70C), total: 60W to 80W. Option 1 and 2 combined: total: 117.5W to 172.5W. P0: Vw, Vx, Vy, Vz: at +15V rated each for 4A/3A (20C/70C), i.e. 180W to 240W total.

  4. FTK Rear Transition Card Routing: - HS lines:- routed between ground planes, 6mil width, 4 mil gap, 100Ohm, reduced number of vias, ground return vias, first plane cut-out under AC caps, matched length in pair. - LVTTL lines: separate layers, 4 mil width, 50Ohm. - 2 Oz Copper on 1.1V POWER_1.

  5. FTK Rear Transition Card Material Selection Attenuation = 2.3 f (tand) sqrt(er) Max trace length: 16” for 2Gbps, 4” for 6Gbps Note: The first AUX Test Card, made with FR4, has max trace length 12” for 2Gbps: Signal Loss = 1.6dB.

More Related