1 / 38

3D-MC 2 Basic Functions

Join this LISTEN-only webinar to learn about the new menu functions and features, the updated data file structure, and the removed and disabled menu items. Discover the supervisor mode, new OAF structure, and the steering bug reference. Get access to reference materials and simulations. Support for various configurations and machines. Q&A session at the end.

vanessae
Download Presentation

3D-MC 2 Basic Functions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 3D-MC2 Basic Functions

  2. This Webinar is LISTEN only QUESTIONS? Questions will be answered in writing at the end of the Webinar.

  3. AGENDA New Menu Functions and Features New Look Data File Structure New Menu Items Removed Menu Items Disabled Tech Items Supervisor Mode New OAF Structure Steering Bug

  4. Reference Material Reference Material • TU will be creating lessons for the new software • Quick Guide 7010-0921 • 9.0 code simulator (Available on secure site) • OAFs will be required to run the simulator

  5. 9.0 Code 9.0 Code • New 9.0 operating code 3D-MC2 Dozer only • Will not support any other configurations • New 9.1 scheduled for later this year • Supports all configurations and machines • All MC-R3s will have updated 5200 boards

  6. New Look • New Look • Menu Items are the same • New Icons

  7. New Data File Structure • New Data File Structure • Projects (same file structure used in Office 3D)

  8. New Data File Structure • Projects (TP3) • Control Points • Surface Files • Linework and Points Files

  9. New Data File Structure • Control • Only one control file in your Project

  10. New Data File Structure • Layers • Layers may contain both Points and Linework

  11. New Data File Structure • Surfaces • Contain all the 3D Surface Files (TN3/RD3 and PT3) • Select Yes to make available

  12. New Data File Structure • Importing Surfaces • Imported surface is added to the Project File

  13. New Data File Structure • New Surface types • Crown/Triangulated Surface

  14. New Data File Structure • Active • Selects active Grading surface

  15. New Menu Items • Control Tab • Selections available for 3D-MC2

  16. New Menu Items • Slope Sensor Selection (Machine Builder)

  17. New Menu Items • Tools Tab (Position Check/Position Check Save) • Shortcut by touching screen

  18. New Menu Items

  19. 3D View • 3D View

  20. Show Surface Name • Section View (Show Surface Name)

  21. Reverse Image • Profile View (Reverse Image)

  22. Cut/Fill Tape options • Cut/Fill Tape options (Elevation Only)

  23. Cut/Fill Elevation information • Cut/Fill Elevation information

  24. Cut/Fill Tape options • Cut/Fill Tape options (Slope Only)

  25. Cut/Fill Tape options • Cut/Fill Tape options (Elevation and Slope)

  26. Direction of Travel • Display Options Direction of Travel

  27. Direction of Travel • Direction of Travel Options • Always up-screen (current 9168 view) • Always down-screen (Trencher) • Up-screen +/- 45o (Excavator swing) • Up-screen +/- 90o (Excavator swing) • Fixed orientation (select job orientation)

  28. Removed Menu Items • Removed Items • Sub Grade • Reference Surface

  29. Disabled Tech Items • Disabled Tech Items (Advanced Settings)

  30. Supervisor Mode • Tools Tab

  31. Supervisor Mode • Lock Menus

  32. Supervisor Mode • Lock Buttons • Cancel and OK buttons can’t be locked

  33. Supervisor Mode • Lock Screen Items

  34. New OAF Structure • New OAF Structure

  35. Known Steering Bug • Steering (Cross section) • 9.0 code displays correct for up station direction • Operates same as Pocket 3D • Will change in 9.1 UP Station Down Station

  36. Known Steering Bug • Steering (Light Bar display) • In both examples Dozer needs to turn Left Down Station Up Station

  37. 9.0 Code Conclusion • New Look • New File Structure taken form Office 3D • Two Removed features • Disabled Tech Items • Many New Features • New OAF Structure

  38. Questions? Everyone who registered for this TU-Live session will receive an email with a direct link to download a copy of the this presentation. Presentation; video, PP, Q & A Additional requests for TU staff: Email: training@topcon.com

More Related