Laboratory Fundamental Physics at ESMD

1. Laboratory Fundamental Physics Program at Exploration Systems Mission DirectorateInternational Conference onQuantum to Cosmos:Fundamental Physics Research in Space Mark C. LeeProgram ExecutiveMay 24, 2006

2. Laboratory Fundamental Physics at ESMD • Physics and Chemistry Experiments (PACE) • LPE/CHeX/ZENO/CVX;DDM/DPM/STDCE;AADSF/CGF;IDGE; • SSCE/DCE;PHaSE;STEP • STEP • PACE Review • I. Shapiro Panel Review • ESA Medium-size Mission Reviews • Blue Ribbon Panel Reviewed chaired by Joseph Taylor • Presentation to NASA Administrator Mr. Dan Goldin • CodeS/CodeU/OBPR/ESMD invested $28M in pre phase A • Transferred from ESMD to SMD

3. THE NEW PHYSICS COUPLING CONSTANT GEOMETRY HARD HARD Newton SOFT HARD Einstein String SOFT SOFT STEP Theory Gravitational and Relativistic Physics Satellite Test of the Equivalence Principle (STEP) (F. Everritt TBD launch) • Science Objectives • To verify the validity of one of the fundamental assumptions underlying Einstein’s general theory of relativity -- the equivalence of inertial and gravitational mass, to a precision of 10-18. • To discover or rule out the existence of weakly coupled long-range forces • Mission Description • Drag free spacecraft launched by LMLV-1 vehicle • 400 kilometer sun-synchronous, polar orbit • Six to eight months mission duration • Measurement Strategy • Measure relative positions of finely machined cylindrical test masses inside a low-temperature dewar using SQUID technology • Technology • Differnential accelerometer with noise < 10-15 g over 1,000 seconds • Charge control system for test masses • Gravity gradient control (helium tide) • Drag-free satellite and micronewton thruster Galileo Galilei

4. Fundamental Physics Overview Gravitational and Relativistic Physics Biological Physics Laser Cooling and Atomic Physics Alpha Magneto Spectrometer Low Temperature and Condensed Matter Physics • Two long-term Quests that motivate our research • Five research areas pursued to seek answers to our Quests Quest One Quest Two To Discover and Explore Fundamental Physical Laws Governing Matter, Space, and Time To Discover and Understand Organizing Principles of Nature from which Structure and Complexity Emerge Our Benefits: Fulfill the Innate Human Desire to Understand our Place in the Universe Build the Foundation for Tomorrow’s Breakthrough Technologies

5. Laboratory Fundamental Physics at ESMD continues… • CodeS/CodeU/OBPR/ESMD Laboratory Fundamental Physics Program • Laser Cooling and Atomic Physics (LCAP) • BEC/Designer Quantum Systems;EDM;Atomic Clock; • Atom Laser;Atom Interferometer;Red Shift; Fundamental Constants; • EP… • Condensed Matter Physics (CMP) • Critical Phenomena;Renormalization Group Theory… • Gravitational and Relativistic Physics • 1/r2;EP;Test of Special and General Relativity;Test of Standard Model; • Big G;Anisotropy of Speed of Light;Super String Theory… • Distinguished NASA PI Community • Annual Budget at ~$30M

6. Primary Atomic Reference Clock in Space Donald Sullivan, National Institute of Science and Technology As the Laser Cooling Pathfinder PARCS will improve timekeeping while testing fundamental tenets of Einstein’s theories Why: Atomic energy levels are among the most reproducible phenomena in Nature and are also the basis for atomic clocks. Such clocks make fertile testing grounds for physics beyond the levels of current understanding while also supporting standards needed for commerce, high speed communications, and navigation. How: PARCS involves frequency comparisons between high-performance atomic clocks on the ISS and on the ground. Atoms cooled to a millionth of a degree above absolute zero float through a microwave interrogation region to measure the transition used to define the base unit of time, the second. Microgravity allows long interaction times reducing effects which limit the performance of ground clocks. Impact: PARCS will set new limits on our understanding of gravity as it relates to the nature of time and space while realizing the world’s most accurate clock. Techniques and capabilities developed for PARCS enable future science measurements using laser cooling and space atomic clock. From RDR panel report: “Second, the Panel concluded that the scientific motivation for the experiment remains excellent and the need for microgravity and the access to space is compelling. The Panel continues to fully and enthusiastically endorse the science that drives this mission…” Artist rendition of laser-cooled cesium clock in space. “PARCS: a Primary Atomic Reference Clock in Space,” Proceedings of the 1999 IEEE International Frequency Control Symposium, p. 141 (1999).

7. Rubidium Atomic Clock Experiment Kurt Gibble, Penn State University The Ultimate Stability and Accuracy in a space-based Atomic Clock • Why: • Advance atomic clock science to enable measurements with accuracy of 1 part in 1017. • Significantly improve the classic clock tests of general relativity and search for violation predicted by string theory. • Distribute the highest accuracy time and frequency from the ISS. • How: • Laser-cooled atomic clock based on high density Rubidium atomic beams. Much less noise in the clock signal than in Cesium. • Circumvents the large shift of the tick rate due to Cs collisions that is inherent to all laser-cooled Cs clocks. High density beams lead to clock instabilities in Cs. • Novel double clock configuration employed to reduce the cost and complexity of the electronic oscillator that excites the atoms. • Impact: • RACE will explore the limits of relativity, where modern grand unified theories of the cosmos predict a breakdown of Einstein’s theory of gravitation. • RACE and SUMO are currently scheduled to be on the ISS simultaneously. Comparisons of these two clock experiments will improve the relativity test of the anisotropy of the speed of light by over a factor of 1 million. “The SCR panel identifies RACE as being of very high intrinsic value to the scientific community and that the anticipated improvements should be classified as dramatic and as timeless.” Dual Clock Concept launches cold Rb atoms (in blue) opposite directions alternately to improve clock stability and reliability

8. Condensate Laboratory Aboard the Space Station William Phillips, National Institute of Standards and Technology CLASS will advance our understanding of the organizing principles of nature by observing free evolution of macroscopic quantum systems. Why: The study of BEC has been one of the most exciting areas in atomic physics over the past five years. Many of the experiments that have been performed to date have been significantly affected by gravity. How: Laser cooling techniques are used to pre-cool a sample of rubidium atoms to temperatures a few millionths of a degree above absolute zero. The sample is loaded into a miniaturized magnetic trap. Evaporative cooling is used to cool the atoms further by ejecting the hottest atoms from the trap, to allow the remainder to equilibrate at a lower temperature. This cooling technique is continued until the BEC state forms, which is then studied by various means. Impact: Atom lasers are expected to be the key to a new generation of “quantum technologies”, including sensors which employ atom interferometry of coherent atoms to achieve unprecedented sensitivity. Matter-wave holography has potentially significant advantages over conventional lithography techniques. This research is at the forefront of advances in modern physics. It was selected from the OBPR 00 NRA The use of BEC to demonstrate an atomic laser

9. Quantum Interferometer Test of Equivalence Mark Kasevich, Yale University QuITE will search for limits to Einstein’s relativity How: Laser cooling techniques will be used to simultaneously cool and trap both rubidium and cesium atoms. These atoms are allowed to free fall in space, while pulses of light excite Raman transitions to split and recombine the atom waves, and form the interferometers. Atom waves propagating in each arm of the interferometer experience different phase shift in their free fall, allowing the determination of the acceleration of gravity. Comparison of the acceleration experienced by the two atomic species allows testing the EEP. Why: Atom, wave interferometry is an exciting new development based on laser cooling and trapping. Development of instruments based on this approach allows exacting tests of the fundamental physics, including Einstein’s Equivalence Principle (EEP). This approach towards testing the EEP is also distinguished by the feature that tests masses are comprised from atoms, which are quantum entities. Thus matter wave interferometry allows both a high sensitivity test, and one that can directly probe the coupling of gravity to mass at quantum mechanical scales. Impact: Identification of the boundaries of the general relativity, and all metric gravity, is crucial to developing models that reconcile gravity with quantum mechanics. This is arguably the most outstanding problem in Fundamental Physics, today. Quantum particle-wave duality This research is at the forefront of advances in modern physics. It was selected from the OBPR 00 NRA

10. Low Temperature and Condensed Matter Physics Low Temperature Microgravity Physics Facility (LTMPF) (ISS 4/05) • Provides an unpressurized facility for cryogenic microgravity research experiments on the ISS • cold ( 2 K) volume • 5 months lifetime • microgravity environment • passive vibration isolation • environments monitored • multiple-experiments per flight • DYNAMX/SUMO • Launched on either the Space Shuttle or the H-IIA attached to the JEM-EF • First launch planned April 2005 • Brought to Earth following helium depletion to refurbish with new instruments and helium for next flight

11. FP 6 Final Peer Review Date: 2004 FHA: March, 2007 SUMO John Lipa, Stanford University Why a Superconducting Oscillator in Space? --- Test Special and General Relativity How: SUMO is developing a new generation of superconducting microwave cavities that are much less sensitive to acceleration than earlier models. Two superconducting cavities will be mounted at right angles to each other for Special Relativity tests, and comparison with an atomic clock gives additional tests of Special and General Relativity. Dependence of the frequencies on orientation and orbital velocity vector of ISS will lead to tests of deviations from the Standard Model of matter. Why: The ultra-stable frequency from a superconducting microwave oscillator probes new science because it depends in a unique way on the underlying constants of fundamental physics. Additionally, the SUMO oscillator provides a low noise signal to improve the performance for atomic clock experiments on the ISS. Impact: Provides new tests of three basic theories of physics: Special Relativity, General Relativity, and the Standard Model of matter. Also, interconnection with ISS atomic clock experiment RACE improves both science and atomic clock performance. SUMO will be a landmark experiment. It will not only allow scientists to test the fundamental theories of physics with unsurpassed precision, but will also advance the performance of our most accurate clocks. Superconducting cavity design for reduced acceleration sensitivity “Testing Relativity with clocks on Space Station”, J.A. Lipa et al, Proceedings, 2nd Pan Pacific Basin Workshop on Microgravity Sciences, Pasadena, CA May 1-4, 2001.

12. Cell Cooling stage High resolution Thermometers FP2 Final Peer Review Date: 1999 FHA: May, 2005 DYNAMX Robert Duncan, University of New Mexico How do out-of-equilibrium conditions modify the nature of continuous phase transitions?--- Provide a bridge between theory and real systems Why: The superfluid transition in 4He has been the model system for testing the fundamental theory of phase transition. When driven away from equilibrium, the superfluid transition evolves from a simple critical point into a fascinating and complex nonlinear region, where the onset of macroscopic quantum order is masked by Earth’s gravity. How: A new type of exceptionally stable high-resolution thermometers will be used to measure the thermal profile near the normal to superfluid interface while a small heat flux Q travels through the helium. The superfluid interface will be advanced slowly though the cell, and the temperature profile behind the interface will be recorded by three temperature probes imbedded in the sample cell’s side walls. Impact: The results will provide conclusive experimental tests of the most advanced existing theories describing dynamical phase changes. These results will impact the understanding of dynamical critical phenomena, quantum liquids, quantum phase fluctuations, and closely related fields such as cosmology and quantum statistics. A bold attempt to explore a new area of critical phenomena, the study of non-equilibrium dynamics near criticality. Peter K. Day, William A. Moeur, Steven S. McCready, Dmitri A. Sergatskov, Feng-Chuan Liu, and Robert V. Duncan, Phys. Rev. Lett. 81, 2474, 1998. RV Duncan, AV Babkin, DA Sergatskov, STP Boyd, TD McCarson, PK Day, J. Low Temp. Phys. 121, 643, 2000. Figure Caption

13. FP 4 Final Peer Review Date: 2002 FHA: May, 2005 CQ David Goodstein, California Institute of Technology Why measure CQ in space? ---Expand understanding of non-equilibrium systems How: Precision measurements of the heat capacity of helium will be taken just below the helium superfluid - normal fluid transition by applying small pulses of heat while a constant heat is passed through the DYNAMX thermal conductivity cell. The temperature rise caused by the heat pulses will be measured by the three temperature probes imbedded in the sample cell’s side walls. Why: The CQ experiment will extend the DYNAMX experiment into the Superfluid Phase, where a measurement of the heat capacity at constant Q (CQ) should answer the most important scientific issues in that regime. Impact: The discovery of an infinitely large heat capacity always has a dramatic, transforming effect in physics. Just such an effect has been predicted theoretically in the conditions of the CQ experiment. The theory cannot be tested in the laboratory, but verification might be possible in gravity-free conditions. CQ will be a no hardware or engineering cost extension of the DYNAMX experiment. Ground experimental results showing the enhancement in the heat capacity with applied heat current compared to theory and zero heat flow. CQ was selected from the OBPR-00 NRA Weichman, Harter and Goodstein, Rev. Mod. Phys. 73, 1, 2001.

14. BEST Guenter Ahlers,University of California and Santa Barbara Feng-Chuan Liu, Jet Propulsion Laboratory FP 7 Final Peer Review Date: 2004 FHA: March, 2007 Why BEST in space? --- Comprehensive understanding of the dynamic finite-size scaling How: Measure the thermal conductivity of liquid helium near the superfluid transition at various pressures with cylindrical and rectangular confinement of various characteristic sizes in a combination of ground (< 10 mm) and flight (~50 mm) experiments. Two types of DC SQUID-based superconducting devices are employed to achieve high-resolution measurements: the High-Resolution Thermometer (HRT) for extreme temperature resolution (< 1 nano-Kelvin) and the superconducting pressure gauge for extreme pressure resolution (< 1 nano-Bar). Why: The dynamic finite-size scaling and the effects of boundaries on transport properties of a fluid are of great scientific and industrial importance, yet have not been well studied. In order to achieve the best and comprehensive understanding, a large range of finite-size systems is required. Due to the gravity smearing effect on the ground, such large range can only be achieved in space. Capillary plate with 2-dimensional slots (5 X 50mm) Impact: Transport properties in finite systems have a broad range of relevance which transcends the helium problem. They are important, for instance, also to electrical conduction in thin wires which is highly relevant in mesoscopic systems and numerous applications. SCR panel statement: “BEST will make a landmark contribution to NASA’s Low Temperature and Condensed Matter Physics campaign.” Capillary plate with 1-dimensional cylindrical holes (50mm)

15. How: The MISTE flight experiment will be performed on the LTMPF/ISS during a 4.5 month period. This study will conduct high precision pressure, density and temperature measurements as well as heat capacity at constant volume and compressibility measurements throughout the critical region of Helium-3. Measurements will specifically be performed along the paths of constant critical density, constant critical temperature and coexistence curve. Why: The most precise theoretical calculations of critical behavior are for a liquid-gas critical point. The huge compressibility associated with the earth’s gravitational field limits measurements in near-critical fluids. This difficulty can only be overcome by performing critical-point measurements in a microgravity environment. Impact: These results can be used to self-consistently test theoretical equation-of-state predictions for universal critical amplitude ratios and relations between critical exponents. These asymptotic and crossover models apply to all simple fluids and fluid mixtures and their unambiguous validation (or modification) will provide a major advancement in condensed matter physics and engineering. The need for a long-duration low-temperature environment in microgravity is particularly compelling for MISTE. MISTE Martin Barmatz, Jet Propulsion Laboratory Why MISTE in Space? --- Advance understanding of critical phenomena Prototype MISTE flight cell FP 3 Final Peer Review Date: 1999 FHA: May, May, 2005

16. COEX Inseob Hahn, Jet Propulsion Laboratory Why COEX in microgravity? --- Advance understanding of phase transition Why: Experimental studies of phase transition near the liquid-gas critical point has been severely affected by gravity. The confirmation and test of fundamental relationship between critical exponents and amplitudes is difficult unless experimental quantities are simultaneously obtained in a same measurement condition. How: LTMPF/ISS and MISTE hardware are used to obtain the coexistence curve of helium-3 fluid near the liquid-gas critical point in microgravity condition. The density of the sample is manipulated in-situ low temperature gas handling system. The temperature is measured by the high-resolution thermometer. The coexistence boundary will be determined by detecting the specific heat anomaly at the transition temperature at different densities throughout the critical region. Impact: We shall test the scaling hypothesis and equation-of-state model predictions with unprecedented accuracy by combining with the data from MISTE experiment. Space cryogenic sensors (temperature, density, pressure) and flight software technologies shall significantly benefit other fundamental physics experiments. The MISTE hardware that will be used for the COEX measurements. COEX was selected from the OBPR-00 NRA FP5 Final Peer Review Date: 2002 FHA: May, 2005

17. Fundamental Physics Expand our Understanding and Enrich Lives Standard Model Relativity Test Bioengineering Free-Flying nano-gravity Laboratory Fluids Biotechnology Department of Energy AMS collaboration Combustion mG Space-based Atomic clocks Biomolecular Physics Department of Commerce NIST investigators Materials Bose-Einstein Condensates Physics Low-Temperature Physics Atom Laser Research

18. Laboratory Fundamental Physics at ESMD continues… • Presidential Moon-Mars Initiative on January 14, 2004 • ESMD Laboratory Fundamental Physics Termination – September 30, 2006 • Objectives of Quantum to Cosmos Conference • Completion Reporting • Search for New Opportunities at NASA • Synergism between NASA/NSF/DOE/NIST • International Collaboration • Future Opportunity • Committee representation • Participate in NRA activity • Flight Opportunity - Free Flyer

19. Background