1 / 3

Velo Overview of ACDC-1

Velo Overview of ACDC-1. K. Akiba. Accomplishments. First test of the complete DAQ chain. Using the 1MHz read out scheme. Multi-Tell1 configuration, read out and data storage to disk. Double sided module configuration.

zihna
Download Presentation

Velo Overview of ACDC-1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Velo Overview ofACDC-1 K. Akiba

  2. Accomplishments • First test of the complete DAQ chain. • Using the 1MHz read out scheme. • Multi-Tell1 configuration, read out and data storage to disk. • Double sided module configuration. • Real data from the module acquired with the new data format. Data time alignment was successful. • Temperature readout worked. • Multi-Tell1 synchronous IP assignments and readout to the farm nodes!

  3. To Do List • Check the reliability of the tell1 algorithms. • Test multi GBE port readout on the tell1. • Check tell1 integration to the Readout supervisor trigger type. • Update Fw CCPC version. (ccserv on-off issue?) • Read out Odin bank from readout supervisor. • Test full trigger speed and throttling. • New event builder and run control • To be understood: missing triggers. • Recheck the problem with the 4 node configuration. • Configure Tell1/Odin without logging in to CCPCs?

More Related