1 / 41

CLX-6240FX & CLX-6200FX series Firmware

CLX-6240FX & CLX-6200FX series Firmware. Revision History. V0.1 : 2007.06.20 : Initial Release – Joong Mok Lee Revision : to Now - Won Young Chi. Overview - I. Model CLX-6200ND : DADF, HDD option, wireless LAN option CLX-6200FX : ADF, FAX

abedi
Download Presentation

CLX-6240FX & CLX-6200FX series Firmware

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CLX-6240FX & CLX-6200FX series Firmware

  2. Revision History • V0.1 : 2007.06.20 : Initial Release – Joong Mok Lee • Revision : to Now - Won Young Chi

  3. Overview - I • Model • CLX-6200ND : DADF, HDD option, wireless LAN option • CLX-6200FX : ADF, FAX • CLX-6210FX : DADF, FAX, HDD option, wireless LAN option • CLX-6240FX : DADF, FAX, HDD, wireless LAN option • Print method • Single-pass printing (Y->M->C->K) • Printing speed • CLX-62x0  20/20 ppm (Color/Mono) • CLX-6240  20/20 ppm (Color/Mono) • Resolution in printing (PC printing) • Best mode 1200 x 1200 dpi • Normal mode 1200 x 600 dpi • Draft mode 600 x 600 dpi • Resolution in printing (Copy) • Default 600 x 600 dpi • Platen photo 1200 x 1200 dpi • Duplex mode support

  4. Overview - II • Memory size (default) • CLX-62x0 : 128MBytes • CLX-6240 : 256MBytes • Panel • 2- line LCD panel support • Ten key, speed dial support • STOP, Start (Color/Mono) Key • Supported I/O port • USB, Network • CRUM • C/M/Y/K Toner, PTB

  5. Overview - III • CPU (CLX-62x0/CLX-6240) • Type : CHORUS3/SPGPXm (ARM 920EJ /PMC 7065) • Speed : 300MHz/533MHz • Bus speed : 120MHz/ 120MHz • One chip solution (HPVC, I/O, JBIG, network …) • Real-Time OS (CLX-62x0/CLX-6240) • pSOS (V2.5) / VxWorks 5.5.1 • Network configuration • Embedded Network

  6. ROM Image • ROM image • ROM release • Boot image • ROM image (except boot image)

  7. F/W Upgrade • USB and Network port are used to F/W upgrade • Network applications (SWAS, SWS) can be used for network port upgrade • Notice : In special mode upgrade, kernel waste header information for CLX-62x0/CLX-6240. You have to check F/W ROM file with MFP set (This mode is ONLY service mode, not user mode)

  8. F/W Upgrade – using button • F/W Upgrade using USB Port • Make sure connecting Printer to the computer with a USB cable • Upgrade in Ready mode • Send ROM image file via USB cable in Ready mode • Upgrade in Special mode • Power ON with pressing ‘STOP key’ two times • Change LCD message ‘Wait Image’ • Send ROM image file via USB cable

  9. F/W Upgrade – using SWS • F/W upgrade using SWS(SyncThru Web Service) • Home -> Maintenance -> Firmware Upgrade 1 2 3

  10. F/W Upgrade – using SWAS 1. F/W upgrade using SWAS(SyncThru Web Admin Service) • Home  Maintenance

  11. F/W Upgrade - using SWAS 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Firmware Upgrade  Upgrade (check device using IP address) 1 2 3

  12. F/W Upgrade - using SWAS 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Maintenance -> Firmware upload (register firmware) 1 2 3

  13. F/W Upgrade - using SWAS 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Maintenance -> Firmware Upload (upload firmware) 1 2 3 4

  14. F/W Upgrade - using SWAS 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Maintenance -> Firmware Upload (confirm uploaded firmware) 1 2 3

  15. F/W Upgrade - VI 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Maintenance -> Firmware Upgrade -> Upgrade (choose firmware) 1 2 3

  16. F/W Upgrade - VI 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Maintenance -> Firmware Upgrade -> Upgrade (choose firmware) 1 2 3

  17. F/W Upgrade - using SWAS 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Maintenance -> Firmware Upgrade -> Upgrade 1 2 3 4

  18. F/W Upgrade - using SWAS 2. F/W upgrade using SWAS(SyncThru Web Admin Service) • Maintenance -> Firmware Upgrade -> Upgrade (Done) 1 2 3

  19. Information print • Demo page • Press OK Key for 2sec • Blinking Green LED (status LED) • System Configuration page • Menu  System Setup  report  configuration  ‘yes’ • Blinking Green LED (Status LED) • Network Configuration page • Menu  System Setup  report  Network Info.  ‘yes’ • Menu  Network  Network Info.  ‘yes’ • Blinking Green LED (Status LED)

  20. Supplies Information • Total Page Count (Color/Mono) • Page Count (C/M/Y/K) • Fuser Life • Toner Remains Percent (C/M/Y/K) • Transfer Belt Life • Tray1/Tray2 Roller Life • MP Roller Life • Model ID (C/M/Y/K/PTB) • Serial No. (C/M/Y/K/PTB) • Product Date (C/M/Y/K/PTB) • Last Used Date • First Installed Date • ADF Scan Page Count • Platen Scan Page Count • Consumables Information (C/M/Y/K)

  21. Status Monitor • Display in Status Monitor window • Consumables Life Errors • Toner Low • Toner empty • Replace Toner Cartridge • Replace transfer belt soon • Replace transfer belt • Replace fuser soon • Replace fuser • Replace imaging unit soon • Replace imaging unit • Replace Pickup (tray1/tray2) roller • Need to replace those items when replace error is indicated

  22. Consumable Unit Activity • Toner Empty Status should be selected option as below: • - Color : Stop, Continue, Mono Only • Mono : Stop, Continue • *Stop  all printing is not allowed. • *Continue  all printing is allowed until toner cartridge is exhausted. • *Mono Only  color printing data is wasted. Mono printing only allowed. • Invalid/Install Toner Status • Color/Mono/PTB : all printing operation is not allowed. • Exhausted Toner Status (After Empty Status) • Color/Mono : all printing operation is not allowed.

  23. Lily (CLX-62x0) Part. II Engine F/W

  24. ② ④ ① ③ ⑤ ⑥ EDC Mode • Method to enter • Power – On the printer, and wait until the “READY” message appearing on LCD Panel. • Push button like next time “Menu -> Stop -> Left arrow -> Back -> OK -> Right arrow” • “COMPONEMT TEST Press Menu Key”

  25. Keys

  26. EDC Menu 0. Cover Status

  27. Cont. • 1. Sensor Status

  28. Cont. • 2. Motor Test

  29. Cont. • 3. Fan Test

  30. Cont. • 4. Clutch/Sol.

  31. Cont. • 5. Fuser Ctrl

  32. Cont. • 6. LSU Control

  33. Cont. • 7. DEV Control

  34. Cont. • 8. Reset Param ( Take care of this menu because all color regi. data is initialized.)

  35. Cont. • 9. PrintTest

  36. Error list and recovery • Operating Error • Paper Jam • MP(Tray1, Tray2) Paper Jam0 • When feed sensor is not checked in limit-time after Pick- up • Right Cover Open /Close (check Feed Sensor and Pick-up solenoid) • Paper Jam1 Open/Close Door • When exit sensor is not checked in limit-time after Feed - In • Right Cover Open-> remove the paper-> cover close (check Feed Sensor , Exit sensor and fuser motor) • Paper Jam2 Check Inside • When exit sensor is not checked in limit-time after Exit-In • Right Cover Open-> remove the paper-> cover close (check the exit sensor) • Duplex Jam0 Check Inside • When Feed sensor is not checked in limit-time after Exit-Out • Reverse Jam0 Check Inside • When rev. Swing sensor is not checked in limit-time after Exit-In • Reverse Jam1 Check Inside • When rev. Exit sensor is not checked in limit-time after Swing-Out

  37. Cont. • Cover Error • Cover Open : Install Transfer Belt message is toggled. • When right cover is opened or PTB (Paper Transfer Belt) is not installed • Check that PTB is installed • Check Right-cover switch, and PTB connector • Cassette Out Error • Tray1(Tray2) Cassette Out • When Tray1- Cassette is out. • When tray is dedicated Tray2 in printer – driver and Tray2- Cassette is out. • Paper Empty / Paper Mismatch • MP(Tray1, Tray2) Paper Empty • When dedicated-tray is empty • Load A4 In MP(Tray1, Tray2) • When paper dedicated in driver is different with paper in tray. • Push the ”Stop” key , and documents will be printed continuously

  38. Cont. • Service Call error • LSU Motor Error Cycle Power • When lock signal of LSU motor is not checked • Check LSU and Main board (check Connector) • OPC Motor Locked / Deve Motor Locked • When lock signal of BLDC motor is not checked • Check Motor and Main board (check Connector) • Fuser Error • Low Heat Error Cycle Power • Fuser temperature is not reached at target temperature in limited time. • Over Heat Error Cycle Power • When Fuser temperature is more than a over- heat temperature • ADC Slope Error Cycle Power • Fusing Unit is not heated • Thermistor Open/Short Cycle Power • Thermistor level is not normal • Check Thermistor is not connected , Thermistor is dirty , thermostat is opened

  39. Cont. • Outer (Inner) Temp. Error Cycle Power • Temp. Sensor- level is not normal • When color Regi. is not corrected • First , Check Toner-Density • Second, Check scratch of PTB.

  40. Cont. • Consumables • Install Cyan (Magenta, Yellow, Black) Toner • Install Transfer Belt • When CRUM Interface is abnormal • Extract Consumables from the Printer, and push consumables to the printer again. • Invalid Cyan (Magenta, Yellow, Black) Toner • Invalid Transfer Belt • When CRUM Interface is abnormal • Extract Consumables from the Printer, and push consumables to the printer again.

  41. The end

More Related