1 / 8

General Arrangement of the Absorber integration into the Focusing Coil Magnet

General Arrangement of the Absorber integration into the Focusing Coil Magnet. See P2 for enlarged views. See P 4 for enlarged views. See P3 for enlarged views. P. 1. Upper section of the Coil Assembly. P. 2. Lower section of the Coil Assembly. P. 3.

ebony-haley
Download Presentation

General Arrangement of the Absorber integration into the Focusing Coil Magnet

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. General Arrangement of the Absorber integration into the Focusing Coil Magnet

  2. See P2 for enlarged views See P 4 for enlarged views See P3 for enlarged views P. 1

  3. Upper section of the Coil Assembly P. 2

  4. Lower section of the Coil Assembly P. 3

  5. Absorber Assembly with the Support tubes, Heat conduction tubes & feed pipes P. 4

  6. Coil retention forged tube Dual purpose H ring Central reinforcing tube to minimise bending at forged tube ends during quenching` Tapered Ring to reduce axial force component (during quenching) & avoid direct dowelling into forge tube. Dowel / Shear Pins P.5

  7. Absorber support tube Plenum for GHe 304 SS tube Inconel buttering for Al / SS transition weld Nib for seal weld & subsequent Window removal Al5456 tube double filleted at Safety Window & seal welded at Absorber body GHe to LH2 H/X Absorber Window threaded into Body to sustain Pressure load P. 6

  8. Vacuum Pipe (2-off) Vacuum Pipe double fillet welded to AL5456 tube, and further supported on Absorber support tube via G10 collarif heat flow to Safety window proves necessary P. 7

More Related