130 likes | 289 Views
Phase-Adjustable Pipelining ROM-Less Direct Digital Frequency Synthesizer With a 41.66-MHz Output Frequency. Chua-Chin Wang , Senior Member, IEEE , Jian-Ming Huang, Yih-Long Tseng, Wun-Ji Lin, and Ron Hu. R. Hu is with Asuka Microelectronics Inc., Hsinchu, Taiwan, R.O.C.
E N D
Phase-Adjustable Pipelining ROM-Less Direct Digital Frequency Synthesizer With a 41.66-MHz Output Frequency Chua-Chin Wang, Senior Member, IEEE, Jian-Ming Huang, Yih-Long Tseng, Wun-Ji Lin, and Ron Hu R. Hu is with Asuka Microelectronics Inc., Hsinchu, Taiwan, R.O.C. Digital Object Identifier 10.1109/TCSII.2006.882236 Rostrum:De-Ji Liu Date:04/07/2008
OUTLINE • Abstract • Introduction • High speed ROM-LESS DDFS • Trigonometric First-Order Quadruple Angle Approximation • Second-Order Approximation • System Design by Ten-Stage Pipelining • Comparison
ABSTRACT • A high-speed phase-adjustable read-only-memory less direct digital frequency synthesizer employing trigonometric quadruple angle formula. • A ten-stage pipelining architecture is employed based upon decomposition of phase operands.
INTRODUCTION • All of the ROM-based solutions suffer from ROM’s, low speed, large area, and high power consumption. • However, to reduce the error, a scaling table and an error correction table are needed in their design. • We propose a novel pipelining ROM-less design for DDFS that employed a trigonometric quadruple angle formula to attain a smaller error range.
Trigonometric First-Order Quadruple Angle Approximation The quadruple angle formula can be rearranged as follows: We redefine our first-order approximation method, which is called TA1(X) ,as follows:
Fig. 1 illustrates the actual cosine function and TA1(x) , whereas the difference of these two functions. TA1(x) - cos4x, is given in Fig. 2.
Second-Order Approximation A simple thought to further reduce the amount of error between the cosine function and the approximation equation is to employed a second-order difference method, which is given as follows: