1 / 5

NanoFab Simulator Update

NanoFab Simulator Update. Nick Reeder, March 30, 2012. Update to Etch Code. Etch code asks user for etchant and time, and uses etch rates from Williams’ papers to compute amount of materials to remove. For unknown rates, warns user and assumes 0.

malaya
Download Presentation

NanoFab Simulator Update

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NanoFabSimulator Update Nick Reeder, March 30, 2012

  2. Update to Etch Code • Etch code asks user for etchant and time, and uses etch rates from Williams’ papers to compute amount of materials to remove. • For unknown rates, warns user and assumes 0. • Process is highly iterative, simulating one minute of etching at a time. Lengthy etch times take a while to execute.

  3. Questions • One-minute etch resolution okay? • Etch rate assumptions okay? • Need to distinguish materials based on method of deposition? (E.g., wafer silicon vs. sputtered vs. evaporated….) • What parameter(s) should user provide for Polish operation?

  4. Questions • Looking ahead to photolithography, how many states do we need to distinguish for photoresists? • Freshly applied • Soft-baked, unexposed • Soft-baked, exposed • Hard-baked, unexposed • Hard-baked, exposed • …?

More Related